InkStitch: Difference between revisions

The educational technology and digital learning wiki
Jump to navigation Jump to search
 
(188 intermediate revisions by 3 users not shown)
Line 1: Line 1:
{{incomplete}}
{{syllabus
 
|is_part_of_syllabus=Machine embroidery
|is_part_of_module=InkStitch
|do_not_show_sub_page=No
|page_next=InkStitch - installation
|status=to improve
|last_modification=2018/06/05
|objective=Understand the purpose of InkStitch, Install InkStitch,
Run a InkStitch annotated SVG file
|difficulty=beginner
|see_also=Computerized embroidery,
InkStitch - basic use
|cat_syllabus=InkStitch
|prequisite=InkScape
}}
[[fr:inkStitch]]
[As of summer 2022, this documentation is outdated and requires some updating. Principles remain the same]
== Introduction ==
== Introduction ==


'''[https://inkstitch.org Ink/Stitch]''' is an [[Inkscape]] extension for designing machine embroidery patterns. According to the [https://inkscape.org/en/~wwderw/%E2%98%85inkstitch-embroidery-extension extension page], {{quotation|Select objects that you want to apply embroidery properties and using the extension, set the parameters for the desired object(s). Once all desired objects have embroidery properties, use the extension to generate the necessary stitch file.}}
'''[https://inkstitch.org Ink/Stitch]''' is an [[Inkscape]] extension for designing machine embroidery patterns and machine embroidery files. Ink/Stitch is in our opinion the best open source and free embroidery digitizing software. It offers good basic functionality and can be used in schools to teach both vector graphics and design. - [[User:Daniel K. Schneider|Daniel K. Schneider]] 20 July 2018


As far as we can tell without much testing (May 3 2018) this extension seems to be the '''first usable open source program that allows creating embroidery files within an open source drawing tool'''.
According to the [https://inkscape.org/en/~wwderw/%E2%98%85inkstitch-embroidery-extension extension page], {{quotation|Select objects that you want to apply embroidery properties and using the extension, set the parameters for the desired object(s). Once all desired objects have embroidery properties, use the extension to generate the necessary stitch file.}}
* Ink/Stitch allows creating stitch files from particular SVG drawings, i.e. so-called path. Any SVG object can be translated into a path object.
* SVG fills can translate to filled stitch areas, SVG strokes can translate to zigzag (simple satin) and lines. Finally, there is a mechanism to create satin columns.
* SVG path objects can be parameterized for all of these four stitch types (filled areas, simple or complex zigzags, lines), including some underlay.


'''Please''', also consult the [https://inkstitch.org the official Ink/Stitch] website and its manual.
According to the [https://inkstitch.org/ project page], {{quotation|Ink/Stitch aims to be a full-fledged embroidery digitizing platform based entirely on free, open source software.  Our goal is to be approachable for hobbyists while also providing the power needed by professional digitizers.}}


== Installation ==
'''List of tutorials'''


This extension software was tested with Ubuntu 16x and Windows 10 on May 3 2018. We managed to produce embroidery files for both Linux and Windows.
You also can use the navigation menu to the right


* Download the [https://github.com/lexelby/inkstitch/releases/latest latest release]
* [[InkStitch - installation]]
* De-archive in the personal extension folder of Inkscape.
* [[InkStitch - basic use‎‎]]
* [[InkStitch - satin columns‎]]
* [[InkStitch - manual stitches]]
* [[InkStitch - tips and trouble shooting‎‎]]
* [[InkStitch - from satin columns to fills with satin borders]]
* [[InkStitch - stitch files from Noun Project icons‎‎]]
* [[InkStitch - emoji embroidery]]
* [[InkStitch - embroidery logos]]
* [[InkStitch - create stitch files from hand drawings‎‎ ]]
* [[InkStitch - embroidery patch]]
* [[InkStitch - QR code embroidery]]
* [[InkStitch - lettering]]
* [[InkStitch - design letters]]
* [[InkStitch - Geneva-simple typefaces]]
* [[InkStitch - fills with programmable stitches]]
* [[InkStitch - data visualization]]
* [[InkStitch - hotfix]]


'''Under Ubuntu'''
'''Print version'''
* Extract files to <code> ~/.config/inkscape/extensions</code>
* [[EduTech Wiki:Books/InkStitch]] (either as free PDF or as PediaPress book)
cd ~/.config/inkscape/extensions
tar zxf ~/Downloads/inkstitch-v1.0.0-Linux-x86_64.tar.gz


'''Under Win 10'''
'''Warnings''' and disclaimers:  
* Unhide the AppData directory (go to c:\users\__your_home__\, e.g. c:\users\janet
* Unzip in c:\users\__you__\AppData\Roaming\inkscape\extensions


If this does not work, check where the extension folder is in Inkscape: Edit->Preferences->System
* '''This documentation is not associated with the InkStitch project'''. Please '''also read the official documentation''' (including tutorials) [https://inkstitch.org/ in the official site]. We just made a little tutorial while we were learning and testing this extension.
* Some screenshots were made from early versions. Since the project took off during late sprint/summer 2018, changes were made to the interface and others may follow. Please take this into account. Over time, we will adapt most of the documentation...


Once you installed the extension, restart Inkscape.
== Features ==


== Basic use of InkStitch ==
As far as we can tell, the Ink/Stitch extension is the '''first usable open source program that allows creating embroidery files within an open source drawing tool'''. Summarizing:
 
* Ink/Stitch allows creating stitch files from particular SVG drawings, i.e. so-called path. Any SVG object can be translated into a path object.
You can try to following steps in order to test the extension and to learn about basic functionality.
* SVG fills can translate to filled stitch areas (i.e. tatami stitches), SVG strokes can translate to zigzag (simple satin) and lines. Finally, there is a mechanism to create satin columns from paths that include two sub-path lines.
 
* SVG path objects can be parametrized for all of these four stitch types (filled areas, simple zigzags, complex satin zigzags, or lines). Various underlays can be configured, e.g. satin stitches can have three sorts (a center line, border lines or a zigzag).
===Step 1 - draw an object===
* Most embroidery formats can be imported, reused and adapted using Inkscape's path tool (F2).
 
* InkStitch also supports thread color and project management.
Create an object, e.g. a circle. You can use both fill and stroke. Below is an example and its SVG code.
[[file:SVG-yellow-circle-stroke-fill.png|none|thumb|300px|A circle with a yellow fill and a blue stroke (border)]]
 
The SVG code defining the object uses the SVG <code>circle</code> tag. 
<source lang="XML">
<circle
      style="opacity:1;fill:#ffff00;fill-opacity:1;stroke:#0000ff;stroke-width:5.92615652;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
      id="path4147"
      cx="123.99713"
      cy="650.45123"
      r="106.87944" />
</source>
 
You can open the builtin XML tree editor if you want to check the code (CTRL-SHIFT-X)
[[file:Inkscape-092-XML-editor.png|800px|none|thunb|XML editor view of the circle]]
 
===Step 2 - convert to path===
Transform '''all objects''' you want to stitch to '''paths:'''
* Select  all object(s), e.g. hit CTRL+A
* Menu Path->Object to Path
An [https://developer.mozilla.org/en-US/docs/Web/SVG/Tutorial/Paths SVG Path] includes both numbers representing positions and letters representing drawing and moving operations, including Bezier curves and Arcs. You do not need to understand how this works. Only make sure that all objects you plan to stitch are represented by a <code>path</code>. To check this, open the XML editor, then click on the object in the workspace. The XML code will be highlighted.
 
<source lang="XML">
<path
  style="opacity:1;fill:#ffff00;fill-opacity:1;stroke:#0000ff;stroke-width:5.92615652;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
  d="M 230.87657,650.45123 A 106.87944,106.87944 0 0 1 123.99713,757.33067 106.87944,106.87944 0 0 1 17.117691,650.45123 106.87944,106.87944 0 0 1 123.99713,543.57179 106.87944,106.87944 0 0 1 230.87657,650.45123 Z"
  id="path4147" />
</source>
 
Objects that are not of "Path" type, are ignored.
 
=== Step 3 - Parametrize ===
 
In menu Extensions -> Embroider -> Select Params and play with them. There are actually quite a lot compared to other SVG to embroidery translators.
 
For now, we just suggest accepting the defaults. We shall explain parametrization in the next section.
 
=== Step 4 - Create the Embroidery file===
 
You can either create a stitch file for a selection of objects or for all path objects. To create an embroidery file for the whole design:
* Click into some empty space (to deselect)
* Menu Extensions -> Embroider -> Embroidery
* Select the format of your machine. In case you are unhappy with the result, select a widely used format such as Tajima (DST) and then use a free translator to convert to your proprietary format.
* Type a directory name where you can find your files, e.g. c:\users\__you__\Desktop on windows or /home/schneide/schneide/embroidery/inkstitch under Linux. The file will remember this information.
 
You can skip the next step providing some technical details about how embroidery objects are represented in Inkscape.
 
===Step 5 - Inspect in Inkscape===
 
You now also will have a new layer that includes the Stitch Plan, i.e. the objects that have been exported as Stitch objects. You can check this to visualize the points that will be stitched. Alternatively you could use an [[Computerized_embroidery#Free_converter_tools_and_other_utilities|embroidery viewer]]
 
In order to examine the Stitch points
* select the Stitch Plan layer and hide the others (this should be done automatically after using the ''Embroidery'' operation).
* Select the ''Edit Path tool'' in Inkscape
* Zoom in
 
[[file:Inkstitch-stitch-plan.png|800px|none|InkStitch, Stitch Plan. This information will be used to create the embroidery files ]]
 
If you look at the SVG code, you can see that it is now annotated with stitching information. The new layer contains two huge path objects - one for the border and one for the fill - that define all the points to be stitched, plus the stroke color for both. Since the circle was split into two objects with strokes, there is of course no more fill.


[[file:Inkstitch-stitch-plan2.png|800px|none|thunb|InkStitch, SVG code for the Stitch Plan]]
As of December 16, 2018 the [https://github.com/lexelby/inkstitch/releases/latest latest release] was 1.21.0. We strongly encourage using the latest version and checking regularly for updates.


== Simple embroidery parametrization of SVG objects ==
See also:
* [[Computerized embroidery]]
* [[Embroidery glossary]] and [[Concepts of computerized embroidery]]
* [[Computerized embroidery in education]]


InkStitch can produce three kinds of stitch packs from an SVG object
== Support groups ==
* An area from SVG path with <code>fill</code> defined
* Simple zigzag, satin colums or lines from SVG objects with <code>stroke</code> defined
* Two objects (an area and a zigzag/line from a path that has both fill and stroke


If we understood right:
* Report technical problems [https://github.com/inkstitch/inkstitch/issues as issues] to the developers at Github. Do check first if there is already an open issue with the same problem
* Fills can only translate to Areas
* [https://www.facebook.com/groups/inkstitchfrance inkscape - inkstitch]. Friendly and dynamic french group.
* Strokes translate to simple zigzag, satin columns or simple lines
* [https://www.facebook.com/groups/945979722406352/ InkScape to Ink/Stitch Enthusiast Group] Unfriendly American group (e.g. links to tutorials outside facebook are not allowed, who wants to create content on facebook ?)


=== Paths with fills to embroidery areas ===
== Events ==


SVG fills are translated to areas filled with a simple linear pattern that can have an underlay.
{|class="wikitable"
 
!Place/Date!!Status!!Event
In order to parametrize a fill:
* Select an path object that has a fill and no stroke (e.g. something like the green or the red circle below)
* Open the parameter popup window: Menu Extensions -> Embroidery -> Params
 
You will see a little popup that say "Params working, please wait". Just move it out of the way and ignore it. Now look at the <code>Embroidery Params</code> popup window. It will have three tabs (see grey popup in the next screen capture).
* Auto-Fill: Try to change the fill angle. You can also can add STOP and Trim code if they are supported by the stitch file.
* AutoFill Underlay: Add an underlay, i.e. stitches that will be stitched underneath the pattern. This will add some stability and also a little 3D effect. Do not make it too dense.
* Fill: An alternative to auto fill
 
[[file: Inkstitch-stitch-params-1.png|thumb|none|800px|Parametrizing SVG fill objects]]
 
=== Paths with strokes to zigzag stitches ===
 
SVG strokes are translated to simple zigzag or satin stitches that can have an underlay. If you open again the Param popup (Menu Extensions -> Embroidery -> Params), you will see different tabs:
* Stroke (used by default)
* Satin Column
* Center-Walk Underlay
* Contour Underlay
* Zig-Zag Underlay
 
By default, there will be a simple Satin stitch (i.e. a zigzag) for a fat stroke, as shown in the following screenshot.
* Small zigzags are difficult to stitch since they pull and distort the tissue a lot. If you can, go for line thickness between 2 and 3 mm. Otherwise, use less density.
 
[[file: Inkstitch-stitch-params-2.png|thumb|none|800px|Parametrizing SVG stroke objects]]
 
=== Paths with fills and strokes ===
 
Objects that have both fill and stroke will allow parametrization of both, i.e. the param popup will present the combined tabs from the area and stroke parameters.
 
[[file: Inkstitch-stitch-params-3.png|thumb|none|800px|Parametrizing SVG objects with stroke and fill]]
 
If we understand right, strokes of objects that allows have fills can only translate to simple zigzag, not satin stitches that create rounded corners. Workaround:
* Copy paste (in place) the object
* Remove the fill from one of these
* Remove the stroke from the other.
 
=== Summary ===
 
InkStitch provides good basic functionality for creating Stitch files with Inkscape.
 
The stitch file in Tajima DST format was accepted by our multi-needle machine, but I did not stitch the design since it is not really interesting.
{|
|-
|-
|[[file: Inkstitch-stitch-params-result.jpg|thumb|none|400px|Simulation of the Embroidery]]
|Amsterdam, Monday, July 24, 2019|| [[image:080.svg]]||[[Machine_embroidery_in_education_workshop_(EdMedia2019)]] Short URL: https://edutechwiki.unige.ch/en/meew
|[[file: Inkstitch-stitch-params-result-brother.jpg|thumb|none|400px|Stitch file accepted by our [[Brother PR1050X]]]]
|}
 
Remarks:  
*Colors are wrong since the thread palette used in the viewer of Stitch Era and the embroidery machine are different from the default. Thread palettes are difficult to understand...
* There are some extra extra stitch sections that should not be stitched (the little lines).
 
In this section we just presented basic functionality. In particular, InkStitch allows creation of satin colums from more or less parallel lines and also simple lines.
 
== Creating Satin Stitches ==
 
By default Ink/Stitch translates strokes to either lines or perpendicular zig-zag stitches. That simple zigzag model works works find for straight lines or circles, but it cannot handle corners as in the little rocket drawing that we will now digitized.
 
{|
|-
|-
|[[file:Rocket-ship-Clip-Art.svg|Rocket Ship|right|300px|thumb|Source: [https://openclipart.org/detail/261329/rocket-ship-as-clip-art] needing cleanup Rocket Ship as Clip Art]]
|Dagstuhl October 29, 2018||Done||[[Data visualization with machine embroidery]] (75 min workshop at the [https://www.dagstuhl.de/18441 Dagstuhl Seminar 18441 on DataPhysicalization]
|[[file:Rocket-ship-Clip-Art2.svg|Rocket Ship|right|300px|thumb|Source: [https://openclipart.org/detail/261329/rocket-ship-as-clip-art Rocket Ship as Clip Art], but cleaned up]]
|-  
|New York October 9. 2020 (demo)|| [[image:080.svg]]||
[[Computerized embroidery for identity building (fablearn2020)]] (http://edutechwiki.unige.ch/en/fablearn2020)
|}
|}


The drawing is fairly straight forward. In order to process this with Ink/Stick
== Copyright modification ==
* Ungroup everything
* Create a new layer
* Put all elements in this layer.
* Open the XML Editor, click on each element and kill about 6 useless elements that sit underneath the windows. The resulting SVG only should have six objects.
 
== Tips ==
 
=== Inkscape version ===
 
From the [https://inkstitch.org/docs/install/ author of InkStitch]: {{quotation|I highly recommend version 0.92 or greater, which has a really key feature: the Objects panel. This gives you a heirarchical list of objects in your SVG file, listed in their stacking order. This is really important because the stacking order dictates the order that the shapes will be sewn in.
 
Versions 0.92.2 and higher let you bind a key to new commands, “stack up” and “stack down”, which I assign to pageup and pagedown. These let you arbitrarily reorder objects in the SVG file, which lets you directly manipulate which order they stitch in. It works way better than the default “raise” and “lower” commands.}}
 
=== Working with layers and stitch order ===
 
Objects are stitched according to foreground/background order. You can change that order in several ways:
* In Inkscape 0.92 or higher, use the Objects panel (Menu Object -> Objects)
* Use PageUp/PageDown keys and verify in the objects panel (recommended).
* Move the position in the XML Editor
* Use layers. An Inkscape layer is just an SVG group (<code>g</code>) with a special tag. So if you put an object in a layer it will have its position influenced by the layer's position.
 
If you import a drawing, e.g. from [http://openclipart.org openclipart], you could:
* Create a new layer first (Menu: Layer -> Add Layer) or open the Layers panel (Menu: Layer -> layers)
* Select the Layer
* Copy/paste the picture from the SVG page (or import the SVG File)
* Ungroup all objects
* Maybe, arrange them in different layers according to stitch type and order
* Order (strokes and small area usually should be on top)
 
=== Creating stitch lines ===
 
By default, InkStitch translates '''solid''' strokes bigger than 0.5pt to zigzag lines.
 
Since it is easier to see fatter lines, you also can make the stroke of the line '''dotted''', i.e. not solid. It will translate to a simple stitch line as opposed to a zigzag. So, if you need a simple line, make it dotted as shown in the following picture. Bottom left shows the SVG drawing and upper right the Stitch plan.
 
[[File: inkstitch-intro-3.svg|none|thumb|600px|Creating stitch lines using dotted lines]]
 
== Trouble ==
 
=== Satin stitch param combination makes the script crash ===
 
As of May 2018 (InkStitch version 1.7.1 / Inkscape v. 0.91) some combinations of parameters can lead to a crash of the script, i.e. the embroidery will not be generated. You will have to remove the InkStitch specific properties from the SVG code to fix that. This can be done for example by saving the file as simple SVG. It is better to test the embroidery for each parameter change and save the file under a different version number if things go well. This way you only have to undo the last changes or copy/paste the older object that was still working.
 
Exemple error trace:
 
<source lang="bash">
Traceback (most recent call last):
  File "embroider.py", line 108, in <module>
  File "inkscape-0.92.2/share/extensions/inkex.py", line 283, in affect
    errormsg(_("No matching node for expression: %s") % path)
  File "embroider.py", line 97, in effect
   
  File "inkstitch/extensions.py", line 195, in elements_to_patches
  File "inkstitch/elements/element.py", line 244, in embroider
  File "inkstitch/elements/satin_column.py", line 401, in to_patches
  File "inkstitch/elements/satin_column.py", line 370, in do_satin
  File "inkstitch/elements/satin_column.py", line 254, in walk_paths
  File "site-packages/backports/functools_lru_cache.py", line 113, in wrapper
  File "inkstitch/elements/satin_column.py", line 101, in flattened_beziers
  File "inkstitch/elements/satin_column.py", line 128, in flatten_beziers_with_rungs
  File "site-packages/shapely/ops.py", line 464, in split
ValueError: Splitting a LineString with a GeometryCollection is not supported
[9557] Failed to execute script embroider
</source>
 
== Birds example ==
 
Let's create an embroidery from complex SVG paths.
 
Below are notes taken while I learn. I am aware that these are not good enough for beginners - [[User:Daniel K. Schneider|Daniel K. Schneider]] ([[User talk:Daniel K. Schneider|talk]]) 16:23, 4 May 2018 (CEST)
 
'''Get some artwork'''
 
* Get four birds from the noun project (become a member if you want to download and reuse objects without having to use them under their free CC license. I got 4 birds from the [https://thenounproject.com/liv_iko/collection/birds/?i=898697 Bird] collection by Liv Iko
* Pick the ones you like.
* Download as SVG !!
* If you are a non-member, remove the text with the CC license, i.e. edit each file in Inkscape, but make sure to cite the author properly if you publish your embroidery.
 
If you are unable to get this done, you can start from our own example, but do not publish it on any website without giving credit to Liv Iko.
 
=== Embroidery with area patters ===
 
After downloading some icons from the nouproject:
* File -> Import; Select the four SVG files
 
After arranging the four drawings, you could see something like this:
[[file:inkstitch-birds-0.svg|800px|thumb|none|SVG file with four imported icons from Liv Iko's [https://thenounproject.com/liv_iko/collection/birds/?i=898697 Bird] collection. Click twice to get the SVG source]]
* If you do not download from the Noun Project, you can our example above. Make sure to click twice in order to get the SVG file until you see just the drawing, then "save the page as". Also, do not forget to credit the original author.
* Save the file, e.g. call it birds0.svg
 
====Arrange position and size====
* Arrange the designs, e.g., on a bottom line and also adjust the size so that the embroidery will fit into you hoop.
* Each of the birds is now a single SVG path. These are not yet suitable for a nice colorful embroidery. We will have to break them apart
[[file:inkstitch-imported-birds-1.png|800px|thumb|none|Each bird is a a single path]]
* Save the file, e.g. call it birds1.svg
* Again, you could directly take the [https://edutechwiki.unige.ch/mediawiki/images/8/8a/Inkstitch-birds-0.svg SVG file] directly from this wiki.
 
====Break path apart====
* Select all
* Menu: Path -> Break Apart
 
You now should see four piles of black objects.
[[file:inkstitch-birds-2.svg|800px|thumb|none|SVG file with four imported icons from Liv Iko's [https://thenounproject.com/liv_iko/collection/birds/?i=898697 Bird] collection]]
 
Again, you could download the [https://edutechwiki.unige.ch/mediawiki/images/5/5c/Inkstitch-birds-2.svg SVG source]
 
====Colorize====
 
The result are layered "path" objects composed of fills that you now should color a bit. For each object, including the large black backgrounds:
* Add a fill color
* Remove the stroke color
* The easiest way of doing this is to open the "Fill and Strokes" panel, then the XML Editor (Shift+Control+X)
* click on each path object of the XML editor and then define a fill color and remove the stroke color if there is one.
[[file:inkstitch-imported-birds-2.png|800px|thumb|none|Color each object. You can use a thread palette for that]]
 
====Simplify====
 
Currently we have up to three layers, which is too much for stitching.
* We now use the difference operator to subtract an element from the element underneath.
* Copy a smaller area that sits on top of a larger area and move it outside the graphic
* Shift-select the larger (black) area and shift-select the area that sits on top
* Menu: Path->Difference or hit CTRL+-
* Now you should see a hole in the bigger black area. Move the the save smaller area in place. Increase its size a bit so that it overlaps.
[[file:inkstitch-imported-birds-3.png|800px|thumb|none|Color each object. You the difference operator to subtract a smaller area from an underlying area]]
 
You also may want to cleanup a bit. In Inkscape, click on File->Clean up document
 
====Create two layers====
 
This is not strictly needed, but you should take the reflex of creating layers into which you put different types of drawing objects.
 
* Create a new layer and call it Areas
* Select all colored areas and move into a new layer
* Rename the layer with the black "lines" in "Lines"
 
====Parametrize====
 
In your SVG drawings you only got so-called fills. The plugin will translate these into areas filled with linear motif. You can change the angle and the Stitch length for now.
 
* Hide the Layer called ''Lines''
* Open Extensions->Embroidery->Params. This will now allow to parametrize the Stitch Areas
* Add STOP and TRIM if you got a multi-needle machine
* Change default values or just Apply and Quit (we did not change anything else here)
* Do the same for the Lines layer, show it and hide the Area layer
 
====Create the embroidery====
 
* Show all layers you plan to embroider, e.g. here we got "Lines" and "Areas"
* Menu extensions -> embroidery -> embroider
** Select the machine format. As of May 2018, the PES file is incorrect, use DST format which Brother also can stitch.
 
[[file:Inkstitch-birds-4.svg|800px|none|thumb| SVG birds file with two layers, [https://edutechwiki.unige.ch/mediawiki/images/8/84/Inkstitch-birds-4.svg downloadable] ]]
 
The simulated result now looks like this (DST gets the colors wrong, but that's not a real issue since most people do not have a sixteen needle machine with the good threads already installed).
 
As you can see there are also some extra objects that should not be stitched, but they won't hurt. The lines can be easily removed.
 
[[file:inkstitch-imported-birds-4.jpg|800px|thumb|none|Simulation of embroidery]]
 
=== Create borders with satin stitches ===
 
In order to get satin stitches we need to have strokes.
 
* Go back to an early version of the SVG file (after breaking apart)
* Select the object for which you need satin borders
* Create an inset: Menu Path -> Inset (this will shave of space from the border)
* Add a stroke
* Remove the fill
* Copy the object (strokes) to the other drawing ....
 
 
== Links ==


* [https://inkstitch.org Ink/Stitch] (home page, which includes several manual pages)
Contents of this page including pictures and SVG files are also available under the [http://en.wikipedia.org/wiki/Wikipedia:Text_of_the_GNU_Free_Documentation_License GNU Free Documentation License] and the [https://creativecommons.org/licenses/by/4.0/ Attribution 4.0 International (CC BY 4.0)] license.
* [https://github.com/lexelby/inkstitch Ink/Stitch] Githup directory
* [https://www.youtube.com/watch?v=FsbD8mnSAO4 Inkstitch Intro Video] (Youtube)


[[category: computerized embroidery]]
The [https://github.com/lexelby/inkstitch/i Inkstitch project] can use any element (text fragments, SVG files, pictures) for the project's official docs without giving attribution (just copy and paste).

Latest revision as of 12:25, 8 October 2023

Machine embroidery
Module: InkStitch
▬▶
⚐ to improve ☸ beginner
⚒ 2023/10/08 ⚒⚒ 2018/06/05
Objectives
  • Understand the purpose of InkStitch
  • Install InkStitch
  • Run a InkStitch annotated SVG file
See also

Objectives

  • Understand the purpose of InkStitch
  • Install InkStitch
  • Run a InkStitch annotated SVG file

See also

  • Quality: to improve
  • Difficulty: beginner

[As of summer 2022, this documentation is outdated and requires some updating. Principles remain the same]

Introduction

Ink/Stitch is an Inkscape extension for designing machine embroidery patterns and machine embroidery files. Ink/Stitch is in our opinion the best open source and free embroidery digitizing software. It offers good basic functionality and can be used in schools to teach both vector graphics and design. - Daniel K. Schneider 20 July 2018

According to the extension page, “Select objects that you want to apply embroidery properties and using the extension, set the parameters for the desired object(s). Once all desired objects have embroidery properties, use the extension to generate the necessary stitch file.”

According to the project page, “Ink/Stitch aims to be a full-fledged embroidery digitizing platform based entirely on free, open source software. Our goal is to be approachable for hobbyists while also providing the power needed by professional digitizers.”

List of tutorials

You also can use the navigation menu to the right

Print version

Warnings and disclaimers:

  • This documentation is not associated with the InkStitch project. Please also read the official documentation (including tutorials) in the official site. We just made a little tutorial while we were learning and testing this extension.
  • Some screenshots were made from early versions. Since the project took off during late sprint/summer 2018, changes were made to the interface and others may follow. Please take this into account. Over time, we will adapt most of the documentation...

Features

As far as we can tell, the Ink/Stitch extension is the first usable open source program that allows creating embroidery files within an open source drawing tool. Summarizing:

  • Ink/Stitch allows creating stitch files from particular SVG drawings, i.e. so-called path. Any SVG object can be translated into a path object.
  • SVG fills can translate to filled stitch areas (i.e. tatami stitches), SVG strokes can translate to zigzag (simple satin) and lines. Finally, there is a mechanism to create satin columns from paths that include two sub-path lines.
  • SVG path objects can be parametrized for all of these four stitch types (filled areas, simple zigzags, complex satin zigzags, or lines). Various underlays can be configured, e.g. satin stitches can have three sorts (a center line, border lines or a zigzag).
  • Most embroidery formats can be imported, reused and adapted using Inkscape's path tool (F2).
  • InkStitch also supports thread color and project management.

As of December 16, 2018 the latest release was 1.21.0. We strongly encourage using the latest version and checking regularly for updates.

See also:

Support groups

  • Report technical problems as issues to the developers at Github. Do check first if there is already an open issue with the same problem
  • inkscape - inkstitch. Friendly and dynamic french group.
  • InkScape to Ink/Stitch Enthusiast Group Unfriendly American group (e.g. links to tutorials outside facebook are not allowed, who wants to create content on facebook ?)

Events

Place/Date Status Event
Amsterdam, Monday, July 24, 2019 080.svg Machine_embroidery_in_education_workshop_(EdMedia2019) Short URL: https://edutechwiki.unige.ch/en/meew
Dagstuhl October 29, 2018 Done Data visualization with machine embroidery (75 min workshop at the Dagstuhl Seminar 18441 on DataPhysicalization
New York October 9. 2020 (demo) 080.svg

Computerized embroidery for identity building (fablearn2020) (http://edutechwiki.unige.ch/en/fablearn2020)

Copyright modification

Contents of this page including pictures and SVG files are also available under the GNU Free Documentation License and the Attribution 4.0 International (CC BY 4.0) license.

The Inkstitch project can use any element (text fragments, SVG files, pictures) for the project's official docs without giving attribution (just copy and paste).

Retrieved from "https://edutechwiki.unige.ch/mediawiki/index.php?title=InkStitch&oldid=78224"