Hobby milling: Difference between revisions

The educational technology and digital learning wiki
Jump to navigation Jump to search
 
(7 intermediate revisions by the same user not shown)
Line 1: Line 1:
{{stub}}
{{stub}}
<pageby nominor="false" comments="false"/>
<!-- <pageby nominor="false" comments="false"/> -->


== Introduction ==
== Introduction ==


According to [http://www.rolanddga.com/products/scanners/mdx15/ Roland] milling machines manufacturer, retrieved 15:45, 15 February 2012 (CET), {{quotation|Subtractive Rapid Prototyping (SRP) - starting with a solid object and removing unwanted material - has several advantages over traditional rapid prototyping. Significantly less expensive than rapid prototyping machines with the same resolution, SRP machines mill a wider range of materials that cost less and have no need for chemicals or post finishing work. Plus, they produce a superior finish.}}
According to [http://www.rolanddga.com/products/scanners/mdx15/ Roland] milling machines manufacturer, retrieved 16:03, 15 February 2012 (CET), {{quotation|Subtractive Rapid Prototyping (SRP) - starting with a solid object and removing unwanted material - has several advantages over traditional rapid prototyping. Significantly less expensive than rapid prototyping machines with the same resolution, SRP machines mill a wider range of materials that cost less and have no need for chemicals or post finishing work. Plus, they produce a superior finish.}}


One probably should distinguish bweten
One probably should distinguish between
* '''mills for hobby users''' (i.e. serious mills that can cut into hard materials). Such machines are available from about $1000.
* '''mills for hobby users''' (i.e. serious mills that can cut into hard materials). Such machines are available from about $1000.
* '''Mills for creating models as alternative to 3D printing'''. We are interested in the latter, i.e. devices that could be used in an office, a classroom or in the living room. Therefore '''hobby mill''' in this article refers to a mill that can carve out soft materials.  
* '''Mills for creating models as alternative to 3D printing'''. We are interested in the latter, i.e. devices that could be used in an office, a classroom or in the living room. Therefore '''hobby mill''' in this article refers to a mill that can carve out soft materials.  
* Many hobby mills are just some kind of carving machine, i.e. can cut down.
* Many hobby mills are just some kind of carving machine, i.e. can cut down.
* Routers are similar devices, i.e. rather some kind of cutting machine. They include a larger surface and a smaller z-axis.  
* Routers are similar devices, i.e. rather some kind of cutting machine. They include a larger surface and a smaller z-axis.  
* Lathes rotate the workpiece on its axis to perform various operations such as cutting, sanding, knurling, drilling, or deformation ([http://en.wikipedia.org/wiki/Lathe Wikipedia).
* Lathes rotate the workpiece on its axis to perform various operations such as cutting, sanding, knurling, drilling, or deformation ([http://en.wikipedia.org/wiki/Lathe Lathe] Wikipedia).
 
'''Do not trust this''' yet. So far, I don't have any experience/knowledge about this technology - [[User:Daniel K. Schneider|Daniel K. Schneider]] 16:03, 15 February 2012 (CET)


See also:
See also:
* [[CNC router]] (3D carving, CNC milling machine, Shopbot, CNC routing machine)
* [[fab lab]]
* [[fab lab]]
* [[3D printing]]
* [[3D printing]]
Line 21: Line 24:


All the entries concern hobby mills, i.e. not the kind you would use to work with steel and other dangerous materials.
All the entries concern hobby mills, i.e. not the kind you would use to work with steel and other dangerous materials.
The list is far from being complete, but the listed models should provide an idea about what kind of soft materials mills are available.


=== Entry level consumer mills ===
=== Entry level consumer mills ===
Line 38: Line 43:


Links:
Links:
* [http://dvice.com/archives/2012/02/mini-3d-mill-is.php Mini 3D mill is like a mini 3D printer, except the exact opposite] (Dvice.com, retrieved 15:45, 15 February 2012 (CET))
* [http://dvice.com/archives/2012/02/mini-3d-mill-is.php Mini 3D mill is like a mini 3D printer, except the exact opposite] (Dvice.com, retrieved 16:03, 15 February 2012 (CET))
* [http://blog.makezine.com/2012/01/06/rolands-new-cnc-hobby-mill/ Roland's New CNC Hobby Mill], Make Magazine, retrieved 15:45, 15 February 2012 (CET)
* [http://blog.makezine.com/2012/01/06/rolands-new-cnc-hobby-mill/ Roland's New CNC Hobby Mill], Make Magazine, retrieved 16:03, 15 February 2012 (CET)




=== Entry level desktop mills ===
=== Entry level desktop mills ===
==== Shapeoko 2 ====
[https://www.inventables.com/technologies/desktop-cnc-mill-kit-shapeoko-2 http://micro.lumenlab.com/store/cnc-robots CNC Robots]
* Price: Between $300 (partial kit) and $685 (full kit)
* This product is part of an open source project started by Edward Ford
* Shapeoko 2 is a simple, low cost, open source CNC milling machine kit that can be built over a weekend.


==== Lumenlab micRo ====
==== Lumenlab micRo ====


[http://micro.lumenlab.com/store/cnc-robots CNC Robots]
[http://micro.lumenlab.com/store/cnc-robots CNC Robots]  


* Price: This model is either available as kit ($700) or assembled ($1300). Plus a price for  
* Price: This model is either available as kit ($700) or assembled ($1300). Plus a price for  
Line 59: Line 72:
* Price: $1800 assembled or $1000 in a kit.
* Price: $1800 assembled or $1000 in a kit.


==== Zen Toolworks ===
==== Zen Toolworks ====


The [http://www.zentoolworks.com/ Zen Toolworks CNC Machine]s are CNC carving machines. They can be use for relief carving, letter cutting, inlay, PCB isolation routing.
The [http://www.zentoolworks.com/ Zen Toolworks CNC Machine]s are CNC carving machines. They can be use for relief carving, letter cutting, inlay, PCB isolation routing.
Line 66: Line 79:
=== Desktop mills ===
=== Desktop mills ===


Desktop mills are part of the [http://fab.cba.mit.edu/about/fab/inv.html official MIT Fab lab 2.0 specification] (see also [http://wiki.fablab.is/wiki/Portal:Equipment] (FabWiki)
Desktop mills are part of the [http://fab.cba.mit.edu/about/fab/inv.html official MIT Fab lab 2.0 specification] (see also [http://wiki.fablab.is/wiki/Portal:Equipment Equipment] (at FabWiki)


==== Roland Modela MDX series ====
==== Roland Modela MDX series ====

Latest revision as of 14:02, 8 April 2019

Draft

Introduction

According to Roland milling machines manufacturer, retrieved 16:03, 15 February 2012 (CET), “Subtractive Rapid Prototyping (SRP) - starting with a solid object and removing unwanted material - has several advantages over traditional rapid prototyping. Significantly less expensive than rapid prototyping machines with the same resolution, SRP machines mill a wider range of materials that cost less and have no need for chemicals or post finishing work. Plus, they produce a superior finish.”

One probably should distinguish between

  • mills for hobby users (i.e. serious mills that can cut into hard materials). Such machines are available from about $1000.
  • Mills for creating models as alternative to 3D printing. We are interested in the latter, i.e. devices that could be used in an office, a classroom or in the living room. Therefore hobby mill in this article refers to a mill that can carve out soft materials.
  • Many hobby mills are just some kind of carving machine, i.e. can cut down.
  • Routers are similar devices, i.e. rather some kind of cutting machine. They include a larger surface and a smaller z-axis.
  • Lathes rotate the workpiece on its axis to perform various operations such as cutting, sanding, knurling, drilling, or deformation (Lathe Wikipedia).

Do not trust this yet. So far, I don't have any experience/knowledge about this technology - Daniel K. Schneider 16:03, 15 February 2012 (CET)

See also:

Hardware

All the entries concern hobby mills, i.e. not the kind you would use to work with steel and other dangerous materials.

The list is far from being complete, but the listed models should provide an idea about what kind of soft materials mills are available.

Entry level consumer mills

Roland iModula

Roland iModela iM-01 Hobby Mill.

  • Price: About $1000, 600 Euros
  • Cutting area: 4 x 3 inches (1.5 in vertical). This is rather small.
  • Includes the iModela Creator design software
  • Materials: Wax, plastic, light wood, etc.
  • Support site: http://icreate.rolanddg.com
  • As of feb 2012, the EU support site doesn't include a usable list of national redistributors ...

This model has a reputation of milling very slowly, e.g. days for a smaller model.

Links:


Entry level desktop mills

Shapeoko 2

http://micro.lumenlab.com/store/cnc-robots CNC Robots

  • Price: Between $300 (partial kit) and $685 (full kit)
  • This product is part of an open source project started by Edward Ford
  • Shapeoko 2 is a simple, low cost, open source CNC milling machine kit that can be built over a weekend.

Lumenlab micRo

CNC Robots

  • Price: This model is either available as kit ($700) or assembled ($1300). Plus a price for
  • This model also can engrave, pint on fabric, draw/plot and 3D printing (with a seringue ?)
  • Materials: Wood, metal (which one ?), PCBs
  • Work area: 32.3cm X 29.8cm X 8.5cm
  • Resolution: +/-.001 inches

Lumenlab m3

This is a larger model of the micRo (above)

  • Price: $1800 assembled or $1000 in a kit.

Zen Toolworks

The Zen Toolworks CNC Machines are CNC carving machines. They can be use for relief carving, letter cutting, inlay, PCB isolation routing.

  • Price for a DIY kit: from $850 (or less if you buy parts in other places).

Desktop mills

Desktop mills are part of the official MIT Fab lab 2.0 specification (see also Equipment (at FabWiki)

Roland Modela MDX series

Roland MDX-15/20 Scanning and Milling Machines

  • accepts IGES, DXF and STL files, i.e. typical CAD/CNC formats
  • include a 3D scanner
  • Materials: Wood, Plaster, Resin (modeling wax, styrenform), Chemical wood, Aluminum (A5052 according to JIS), Brass

MDX-15:

  • 9.6 kg
  • 152.4 mm x 101.6 mm x 60.5 mm
  • Price: About $3500

MDX-20

  • 13.7 kg
  • 203.2mm x 152.4mm x 60.5mm
  • Price: About $5000
  • Currently (Feb 2012), this is the suggested model in MIT list

Links

  • Hobby milling, construction and purchasing of CNC milling equipment that is suitable for hobby projects.
Retrieved from "https://edutechwiki.unige.ch/mediawiki/index.php?title=Hobby_milling&oldid=71193"