Adafruit Sensors

The educational technology and digital learning wiki
Jump to navigation Jump to search

Introduction

In this article,we propose an overview of the Adafruit Circuit Playground Express (CPX) built-in sensors. This aim of this page is to show you how to leverage them in MakeCode. So, if you are not familiar with MakeCode, we advise to have a look on MakeCode page in this wiki.

In MakeCode, there are two means to read the code : through events or by reading live data:

  • Events: code runs when an event is detected. For example, the On shake event runs code when a certain type of shaking is detected by the accelerometer.
  • Live data: live reading of the sensor data without a particular event taking place. For example,Rotation gets a immediate reading from the accelerometer.

You will find below the 2 style of programming with sensors : through events (left picture) and through live data (right picture).

Adafruit event-vs-livedata.jpg

Adafruit Capacitive touch

Capacitive touch pins

On the CPX, there are 7 capacitive pins (A1, A2, A3, A4, A5, A6 and A7). They can be used as buttons (like buttons A or B). There are two means to read the

Links

At Adafruit

Aknowledgement

Pictures as well as some text was reproduced from the Adafruit circuit playground express documentation. Some pictures are available under a CC BY-NC-SA license. Others are copyright AdaFruit and "all rights reserved" and reproduced with permission. Before you reuse any picture from this website, make sure to look at the license information.

For more information about using Adafruit, see https://learn.adafruit.com.