Flash components overview

This article or chapter is incomplete and its contents need further attention. Some information may be missing or may be wrong, spelling and grammar may have to be improved, use your judgment!

Overview

Flash CS3 component library

Components are prebuilt interface elements (widgets) that will speed up programming of interactive Flash pages. This is part of Flash CS3 tutorials.

This article is really not complete, but some things are usable. E.g. how to use the button component.

Learning goals: Learn how to create and use some Flash 9 (CS3) components; Learn a little bit of Action Script 3 to run something with a button.

Prerequisites: Flash CS3 desktop tutorial; Flash drawing tutorial; Flash button tutorial (not absolutly necessary)

Moving on: The Flash article has a list of other tutorials.; Flash Video component tutorial

Quality: This text should technical people get going and may not be good enough for self-learning beginners. It can be used as handout in a "hands-on" class. That is what Daniel K. Schneider made it for...
Level: It aims at beginners. More advanced features and tricks are not explained here.

Learning materials

Grab the various *.fla files from here:

http://tecfa.unige.ch/guides/flash/ex/components-intro/

The executive summary

Flash has a few built-in components (called widgets or gadgets in other contexts) and the will allow to you to build an interactive environment more quickly than by coding all by yourself.

However, making good use of most of these components still requires basic knowledge of ActionScript. In this article we will try to show a few design patterns that you can copy and adapt.

The executive summary

Open the component library (Window->Components or CTRL-F7)
Drag a component to the stage
Fill in some Parameters
Add some action script that will handle user action events.

Introduction

ActionScript (AS2) vs. ActionScript (AS3)

In CS3, a component library is available for both versions
The AS3 one is smaller as you could see in the screenshot above. We shall focus on Flash 9 and Action Script 3 here. However, the principle of using an AS2 parameters is the same.

In this article we going to look at User Interface components, see the Flash video component tutorial for the Video elements.

To open the component library

Window->Components or CTRL-F7
I suggest to dock it against your library.

Warning - AS2 components are different from AS3 components (!!)

It really is important to plan adhead, i.e. you must decide whether you work with AS2 or AS3 before you start using any component !
As long as you don't use components, don't insert ActionScript code you can easily switch between various Flash and ActionScript versions. Once you start using AS or AS-based components you can't !

Installing other components.

You can just open a component file, but then it will not be permently in your System. To make them permanent:

Quit Flash
Copy to either:

C:\Program Files\Adobe\Flash CS3\language\Configuration\Components

Macintosh HD:Applications:Adobe Flash CS3:Configuration:Components

Introduction - menu-based slideshow with the AS 3 button component

Goal

This section should provide you with an idea how to use a built-in component via the Flash Desktop. There are other ways of using components as we shall explain later...

Design goal of the example

The goal is to make a sort of simple Flash web site. The user at all times will have a menu to the left that will allow him to navigate to different contents. We will build several versions of this. Have a look at the "standard" menu-based slide show before you start reading. Also we will introduce some ActionScript by using a "language" that is hopefully appropriate for non-programmers.

A menu-based flash site

Step 1- Planning the layers

In this example we will work with five layers:

Actions: will include a little Action Script code
Buttons: will include the buttons (displayed on all "pages")
Pictures: Contents we want to display
Credits: A special page for the "who's done it" (we also could have used the pictures layer for this).
Background: A simple background that will remain stable.

So the timeline roughly will look like this:

Timeline of the menu-based slideshow

Create these layers now

Step 2 - Add pictures or other contents

Decide how many pictures you want (we took four)
Select the Pictures layer
Frame 1 is reserved for a Title page.
Create a few new empty keyframes (hit F7) and fill them with pictures or any other content or drawings you'd like. See button tutorial if you don't know how to import pictures. Btw pasting a picture to the stage also does the trick.

Step 3 - Get buttons from the library

Select the buttons layer
Open the component library, select "User Interface" and drag as many buttons to the stage as you have pictures. Add an extra one for the credits page.

Button of the Flash CS3/ActionScript3 component library

Put them into a good position. You may use the Align panel to align and distribute properly (see the Flash arranging objects tutorial if needed).

Step 4 - ActionScript 3 principles

ActionScript 3 does not allow to attach scripts to buttons. One can only script frames in the timeline. In order to script a component we basically have to do three things.

Give name to the component (i.e. the movie instance)
Fill in some parameters, e.g. add a label for the button
Add some ActionScript to the timeline that will:
- Associate a user interaction event (e.g. user clicks) to some action function
- Program the action function

Step 5 - Do It for each button

Click on a button (make sure to lock other layers)
Select the Parameters panel (menu Window->Properties->Parameters)
Give the button instance a unique name: e.g. btn_rainbow is fine. ("btn" means "button" and "rainbow" because this button will lead to a rainbow picture). To be safe:
- Start the label name with a letter
- For the rest use letters, digits or the Underscore "_".
- Do not use whitespaces or punctuation characters or dashes !!
- I suggest that you use only lower case letters (Names are case sensitive)
Then change the label parameter of the button. This is what the user will see. Type anything there, but don't make it too long (it's a button after all). If your text is bigger than the label, change it's width in the same panel, i.e. modify the W: field.

Notice how different it is to work with a component vs. using buttons as explained in the Flash button tutorial]]

Parameters of the ActionScript3 button

Make sure you did this to all buttons.

Step 6 - Open the ActionScript panel

Open the Action Layer, Click in Frame 1
Hit F9 to open the "Actions-Frame" panel. In case it is docked with the parameters, you may undock it to have some more space.
Then paste all the code in steps 7 to 8. Maybe open our flash-cs3-simple-slide-show-menu.fla file and copy from there.

Note: Code that is delimited by /* */ represents so-called comments, i.e. code that is not interpreted by Flash, but that we inserted just to remember what our code is supposed to do. It's always a good idea to document your code ...

Step 7 - Stop the animation from playing in frame one

The stop() instruction will stop Flash from playing all the frames, i.e. we want the user to stay in Frame 1 after the file loads.

stop();

Step 8 - Associate buttons with handler functions

Associate a handler function for each button instance:

Syntax: button_name.addEventListener(Event.type, function_name

Lines below mean:

If the user clicks on the btn_rainbow with the mouse, then the function clickHandler defined below will execute.

btn_rainbow.addEventListener(MouseEvent.CLICK, clickHandler);
btn_tecfa.addEventListener(MouseEvent.CLICK, clickHandler);
btn_bosses.addEventListener(MouseEvent.CLICK, clickHandler);
btn_my_computers.addEventListener(MouseEvent.CLICK, clickHandler);
btn_credits.addEventListener(MouseEvent.CLICK, clickHandler);

Step 9 - Write a clickHandler function

Note: you could have chosen an other name, but as rule function names should be sort of meaningful to you and people who read your program

Instead of writing a function for each button, we just created a single one. This code contains a so-called switch (or case) statement. It's syntax is the following:

switch (value) {
  case value_1 :
    /* do something */
    break;
  case value_2 :
    /* do something */
    break;
  ....
  }

In order to understand which button was clicked, we ask from the event the label of the button (event.currentTarget.label).

Then we goto frame x and ask it to stop again with the instruction gotoAndStop(x).

function clickHandler(event:MouseEvent):void {
	switch (event.currentTarget.label)
	{
		case "Rainbow" :
			gotoAndStop(2);
			break;
		case "TECFA" :
			gotoAndStop(3);
			break;
		case "Bosses" :
			gotoAndStop(4);
			break;
		case "My computers" :
			gotoAndStop(5);
			break;
		case "Credits" :
			gotoAndStop(6);
			break;
	}
}

If things go wrong

Make sure that your syntax is correct. One single ";" missing and your program will fail. In the ActionScript window click on the "Check syntax" icon.

Also indent your code properly. Simply click on the "Auto Format" icon.

Make sure that the Action layer extends to the end of your timeline. Put code in frame 1 and then hit F5 in the right-most frame you use ("insert frame" and 'not insert keyframe !)

Make really sure that your code is in frame 1 and in the Action layer.

Make sure that button instance names and label names are exactly the same in the Parameters panel and your Script.

Here is the picture of the timeline again:

Timeline of the menu-based slideshow

Notice the little "a" in frame 1 of the Actions layer. It means "ActionScript code inside" :)

Extra Step 1

This shows how to program a button that will open an URL in a Web Browser (look at the example file you can download).

btn_edutech_wiki.addEventListener(MouseEvent.CLICK, GoToUrl);

function GoToUrl(event:MouseEvent):void {
	var url:String =  "http://edutechwiki.unige.ch/en/Flash_components_tutorial";
	var request:URLRequest = new URLRequest(url);
	try
	{
		navigateToURL(request, '_blank');
	}
	catch (e:Error)
	{
		trace("Error occurred!");
	}
}

Results

flash-cs3-simple-slide-show-menu.html
Grab the flash-cs3-simple-slide-show-menu.* files from

http://tecfa.unige.ch/guides/flash/ex/components-intro/

Too complicated ?

You may write this code in a slightly simpler but less elegant way: If you have no programming knowledge, you rather may work from the code below. The result will be same, though I changed to color of the background: 3 menu-based slide show

So here is what you need to change:

(1) Event listener registration

So the principle is: For each button you got to register an event listener function. Change:

The number of addEventListener definitions (here we got five)
Make sure that each btn-xxx corresponds to names you gave to your own button instances

myButton.addEventListener(MouseEvent.CLICK, Handler_A);

(2) Define event listener functions

Copy/Paste/Change definitions of functions
So change the name of the function, e.g. clickHandler_1 into Handler_A and the frame it has to jump to.

function Handler_A(event:MouseEvent):void {
    gotoAndStop(2);
}

Note: Formatting in ECMAScript -like languages does not matter. You could have written the above line as:

function Handler_A(event:MouseEvent):void {gotoAndStop(2); }

However, make sure to keep delimiters like the { } ; !!

Start from this complete code

/* This will stop Flash from playing all the frames
   User must stay in Frame 1 */
stop();

/* Associate a different handler function for each button instance:
   Syntax: button_name.addEventListener(Event.type, function_name
   Lines below mean:
   * If the user clicks on the btn_rainbow with the mouse,
     then the function clickHandler defined below will execute
*/
btn_rainbow.addEventListener(MouseEvent.CLICK, clickHandler1);
btn_tecfa.addEventListener(MouseEvent.CLICK, clickHandler2);
btn_bosses.addEventListener(MouseEvent.CLICK, clickHandler3);
btn_my_computers.addEventListener(MouseEvent.CLICK, clickHandler4);
btn_credits.addEventListener(MouseEvent.CLICK, clickHandler5);

/* Each function defines where to move the playhead in the animation.
   E.g. clickHandler2 will go to frame 3 and then stop
   */

function clickHandler1(event:MouseEvent):void {
	gotoAndStop(2);
}
function clickHandler2(event:MouseEvent):void {
	gotoAndStop(3);
}
function clickHandler3(event:MouseEvent):void {
	gotoAndStop(4);
}
function clickHandler4(event:MouseEvent):void {
	gotoAndStop(5);
}
function clickHandler5(event:MouseEvent):void {
	gotoAndStop(6);
}

/* This shows how to open an URL in a WebBrowser */

btn_edutech_wiki.addEventListener(MouseEvent.CLICK, GoToUrl);

function GoToUrl(event:MouseEvent):void {
	var request:URLRequest = new URLRequest("http://edutechwiki.unige.ch/en/Flash_components_tutorial");
	navigateToURL(request, '_blank');
}

Results

flash-cs3-simple-slide-show-menu-fewcode.html
Grab the flash-cs3-flash-cs3-simple-slide-show-menu-fewcode.* files from

http://tecfa.unige.ch/guides/flash/ex/components-intro/

You work with Flash 8 ?

The AS3 script above will not work in Flash 8. You have to work with the AS2 component library. This also means that you'd have to delete the buttons in the above example if you want to convert to AS2. If you make a fresh start, no problem, the component button looks and behaves almost the same as its AS3 version as you can see in the screen capture below:

The AS2 button component

Just change the label and if necessary the width parameter (E.g. we set W: to the left to 400 since the btn_edutech_wiki needs to be large).

Parameters of the ActionScript2 button

Make sure that you open a new ActionScript 2 file (or if work in CS3 and forgot, change the Publish Setting to AS2 before you start using buttons.

ActionScript 2 code

ActionScript 2 code is much simpler. The (good) reason why the much more powerful ActionScript 3 is more complicated is that ActionScript 3 allows to program Flash *.swf without even opening the Flash authoring environment. It's a language also made for programmers who do not necessarily like this frame-based tool and who prefere to develop with an IDE like Adobe Flex.

Anyhow, here is the code inserted in frame 1 of the "Action" layer:

stop();

btn_rainbow.onPress = function() { gotoAndStop(2); };
btn_tecfa.onPress = function() { gotoAndStop(3); };
btn_bosses.onPress = function() { gotoAndStop(4); };
btn_my_computers.onPress = function() { gotoAndStop(5); };
btn_credits.onPress = function() { gotoAndStop(6); };

btn_edutech_wiki.onPress = function () {
  getURL("http://edutechwiki.unige.ch/en/Flash_components_tutorial", "_blank");
};

As you can see, it is much simpler. We just use the following syntax:

name_of_button_instance.onPress = function () {

gotoAndStop (N);

};

Note: Instead of putting this code in the Action layer in one single script, we also could have attached it to the buttons as we did in the Flash button tutorial's simple slide show.

Results

flash-cs3-simple-slide-show-menu-AS2.html
Grab the flash-cs3-flash-cs3-simple-slide-show-menu-AS2.* files from

http://tecfa.unige.ch/guides/flash/ex/components-intro/

Improvements to be made / exercise

If you got more and/or bigger pictures, you actually should not include the pictures in the *.swf, but rather load from the Internet.

You then have to use how to use/program a preloader (we will cover this in some other tutorial).

You may add text (labels) to each picture

You also could add another URL button (e.g. I should add one to the TECFA Logo on top left).

Exercise

Add some contents to frame one and add a "home" button to navigate there.

Customizing buttons

You can customize button skins, but this is not easy.

Double click the button on the stage

However, before you try this:

Be aware that you can change width and height simply though the parameters panel
Color will adapt to background (buttons are transparent)

Read more about Customizing the Button at Adobe

AS 3 built-in component overview

I am (slowly) making a demo (not yet fully completed, but somewhat instructive).

Get the source from http://tecfa.unige.ch/guides/flash/ex/components-intro/

Use of components with the Flash Desktop

Using the UI Components

Using components

Open the component library (Window->Components or CTRL-F7)
Drag a component to the stage. This will also add this component to the library.
Once a component is in your library, just drag it from there

Component assets

Adding a component to the stage or to the library also will copy necessary Component Assets in a folder. Do not delete this folder !
If you wish you can then change the components skins (i.e. the graphical representation) by editing these elements (but make sure that you know what you do).

Parameters

Each component has a series of parameters that you can modify in order to change the component's appearance and behavior.

The most important parameters can be simply changed through the Parameters panel (menu Window->Properties>Parameters)

Flash CS3 Parameters panel (button component shown)

Alternatively, you also can use the Components Inspector.

Flash CS3 Component inspector panel (button component shown)

The components inspector gives extra information, e.g. the name of the component used (on top just below the tab).

Tip: If the parameter or component inspect won't display the parameters, click on an empty spot on the workspace and select the object again. (You likely selected more than one object).

Other parameters only can be changed through ActionScript coding.

Sizing components

With the free transform tool (or similar) you can resize component instances

Just click on it on the stage and do it

I rather prefer to set the size through the parameters or properties panel.

Live preview

If your component doesn't really show, (re)enable live preview:

Select Control > Enable Live Preview (tick the box)

The rest of this article brievly presents each UI component. See also the Flash Video component tutorial which is in a separate article.

Working with the Actions Frame panel

Tip: If your screen is large enough, it's a good idea to drag out this panel to the Desktop (do not let it "touch" Flash. Then pin it down with the pin at the bottom. This way you can move around in your frames and layers and still edit code.

(More is needed here, maybe I will write an actionscript panel tutorial).

Understanding what is going on

A beginner usually has trouble understanding why a script doesn't show any effect. Errors are mostly likely in the data, e.g. in the names you give to your component instances or fields.

One way to track a few things down is to print out messages. Below is really ugly piece of code that attempts to print out information (even if it doesn't exist). Just insert it in the scripts layer after/before your other code. This will write messages to the output pane that will pop up.

this.addEventListener(MouseEvent.CLICK, onMouseClickEvent);  

// Then make the callback  
function onMouseClickEvent(e:Event)  
 {  
   try
   {
     // trace(e);
     trace(">>" + e.type + " event from " + e.target.name + " called on " + this.name);
     trace("------");
   }
   catch (e:Error)
   {
    // trace("Error occurred!");
   }
 }

Remove it once you are done or better just put comments around the code like this:

/*
   .... above code here ....
*/

I have to complete this function, with some more useful infors, but need to read some docs first ...

http://livedocs.adobe.com/flash/9.0/ActionScriptLangRefV3/flash/events/Event.html

Various button components

Button

(see above)

CheckBox

RadioButton

Other

ColoPicker

ComboBox

Label

Numeric Stepper

ProgessBar

ScrollPane

Slider

TextArea

TextInput

Uploader

UIScollBar

List-based components

Lists

These components are based on lists

A list is a row
Rows can have colums
A cell is either an element of a simple row or the intersection of a row with a column

Items

Contents of cells are items
Items are objects with various properties (depending on the component)

The dataProvider parameter

For ComboBox, List, and TileList click on the dataProvider parameter to enter data.

DataGrid

List

TileList

Doing it without the panels

After a day or two learning ActionScript I already am fed up with working with the drag and drop method. Problem is that I can't remember any instance names, label names, etc. and writing little pieces of ActionScript is very time consuming that way.

If you have the same problems, you should write as much as you can directly in ActionScript.

For instance, instead of dragging a ComboBox to the desktop, filling the dataProvider field in the Parameters panel etc. you just write the whole code that creates, positions and fills this thing like that:

Code below (more or less) has been use to make the CS3 components overview

import fl.controls.ComboBox;
import fl.data.DataProvider;
import flash.net.navigateToURL;

var items_CB:Array = new Array(
  {label:"HOME", data: "home_frame"},
  {label:"User Input - buttons", data: "buttons_frame"},
  {label:"Color Picker", data: "color_picker_frame"},
  {label:"Data Grid", data: "data_grid_frame"},
  {label:"Lists", data: "lists_frame"},
  {label:"User Input - more", data: "user_input_frame"},
  {label:"Scrolling", data: "scroll_frame"}
);

var menu_CB:ComboBox = new ComboBox();
// Width of items
menu_CB.dropdownWidth = 200;
// With of the menu button
menu_CB.width = 150;
// Position (from to right: x,y)
menu_CB.move(380, 7);
// Number of rows to display without scrollbar
menu_CB.rowCount = 7;
// Label of the menu button
menu_CB.prompt = "Flash CS3 UI Components";
// Insert the items defined above
menu_CB.dataProvider = new DataProvider(items_CB);
// Register the event handler
menu_CB.addEventListener(Event.CHANGE, changeHandler);

addChild(menu_CB);

function changeHandler(event:Event):void {
	var destination = ComboBox(event.target).selectedItem.data;
	gotoAndStop(destination);
	menu_CB.selectedIndex = -1;
}

Tip: Positioning the box is not that hard. Just turn on the Rules (Right-click->Rulers).

Links

Component libraries

Meta-Index at HotScripts.com (but not sorted by Flash version ....)

* Adobe Exchange beta (various licences, also commercial). Not everything a component.

Atellis (Good reflection component).

Flash components overview

Overview

Introduction

Introduction - menu-based slideshow with the AS 3 button component

A menu-based flash site

Too complicated ?

You work with Flash 8 ?

Improvements to be made / exercise

Customizing buttons

AS 3 built-in component overview

Use of components with the Flash Desktop

Understanding what is going on

Various button components

Button

CheckBox

RadioButton

Other

ColoPicker

ComboBox

Label

Numeric Stepper

ProgessBar

ScrollPane

Slider

TextArea

TextInput

Uploader

UIScollBar

List-based components

DataGrid

List

TileList

Doing it without the panels

Links

Component libraries

Navigation menu

Slow Search