Adafruit Sensors

Introduction

In this article,we propose an overview of the Adafruit Circuit Playground Express (CPX) built-in sensors. This aim of this page is to show you how to leverage them in MakeCode. So, if you are not familiar with MakeCode, we advise to have a look on MakeCode page in this wiki.

The CPX built-on sensors available are :

• Buttons
• Capacitive touch
• Accelerometer
• Light sensor
• Microphone
• Switch button
• Thermometer
• Infrared Transceiver.

Coding sensors in MakeCode

In MakeCode, there are two means to read the code : through events or by reading live data:

• Events: code runs when an event is detected. For example, the On shake event runs code when a certain type of shaking is detected by the accelerometer.
• Live data: live reading of the sensor data without a particular event taking place. For example,Rotation gets a immediate reading from the accelerometer.

You will find below the 2 style of programming with sensors : through events (on left of the picture below) and through live data (on right on the picture below).

Adafruit Capacitive touch

Capacitive touch pins

On the CPX, there are 7 capacitive pins (A1, A2, A3, A4, A5, A6 and A7). They can be used as buttons (like buttons A or B).

Event

The pins can be used as touch inputs, the code use them like buttons. Instead of saying Button A or Button B as the input source, use a pin name like A1.

Links

At Adafruit

• Sensors in MakeCode

Aknowledgement

Pictures as well as some text was reproduced from the Adafruit circuit playground express documentation. Some pictures are available under a CC BY-NC-SA license. Others are copyright AdaFruit and "all rights reserved" and reproduced with permission. Before you reuse any picture from this website, make sure to look at the license information.

For more information about using Adafruit, see https://learn.adafruit.com.