Adafruit Wearables: Difference between revisions

The educational technology and digital learning wiki
Jump to navigation Jump to search
Line 66: Line 66:
Playground express are interesting for education since the board can be programmed with [[MakeCode]], JavaScript or CircuitPython.
Playground express are interesting for education since the board can be programmed with [[MakeCode]], JavaScript or CircuitPython.


* [https://www.adafruit.com/product/3517 Circuit Playground Express - Base Kit], includes a battery and USB cable.
* [https://www.adafruit.com/product/3517 Circuit Playground Express - Base Kit], $25, includes a battery and USB cable.
* [https://www.adafruit.com/product/2769 Circuit Playground Express Advanced Pack], includes 2 Playground express, trheads, needles, alligator clips, a servo motor, NeoPixels, etc.
* [https://www.adafruit.com/product/2769 Circuit Playground Express Advanced Pack], $100, includes 2 Playground express, trheads, needles, alligator clips, a servo motor, NeoPixels, etc.


=== Sewing / fixing ===
=== Sewing / fixing ===

Revision as of 17:39, 23 August 2019

Draft

Introduction

FLORA is Adafruit's wearable electronics platform. It's built around the Arduino Atmega32u4 chip and has built-in USB support.

It is an alternative to the Lilypad

Components of the FLORA system

Boards

AdaFruit Flora. Source: Flickr of AdaFruit

659 FLORA V3

  • FLORA - Wearable electronic platform: Arduino-compatible - v3 (as of Aug 2019) is the main board. It it includes a processor, a LED and various connectors. ($ 15)
  • 4.4 grams
  • 4.5 cm diameter (1.75)
  • 7mm thick (0.3")
  • USB support (Micro B cable needed)
  • Battery connector (several battery types are supported, i.e. 3.5v to 16v))
  • 14 connectors / also used for sewing.

Circuit Playground

  • An board that integrates LEDs, made for learning Arduino programming.
  • See below for the Express pack version.
AdaFruit Circuit Playground Express'. Source: Flickr of AdaFruit

Circuit Playground Express ($25)

This board includes:

  • 10 x mini NeoPixels, each one can display any color
  • 1 Motion sensor (LIS3DH triple-axis accelerometer with tap detection, free-fall detection)
  • 1 Temperature sensor
  • 1 Light sensor. Can also act as a color sensor and pulse sensor.
  • 1 Sound sensor (MEMS microphone)
  • 1 Mini speaker with class D amplifier (7.5mm magnetic speaker/buzzer)
  • 2 x Push buttons, labeled A and B
  • 1 x Slide switch
  • Infrared receiver and transmitter - can receive and transmit any remote control codes, as well as send messages between Circuit Playground Expresses. Can also act as a proximity sensor.
  • .... and more

Input

Ouptut

Packs

Playground Express

Playground express are interesting for education since the board can be programmed with MakeCode, JavaScript or CircuitPython.

Sewing / fixing

Other

Links

Bibliography

See also: e-textile

  • Stern, B., & Cooper, T. (2015). Getting started with Adafruit FLORA: making wearables with an Arduino-compatible electronics platform. Maker Media, Inc..