InkStitch - fills with programmable stitches

Objectives

• Create non-standard fill patterns with Inkscape Digitize path created with Inkscape

Prerequisites

• Inkscape
• InkStitch - basic use‎‎

See also

• Computerized embroidery

• Quality: draft

• Difficulty: intermediate

Introduction

Ink/Stitch, as of summer 2018, provides support for four Embroidery stitch types: Lines, satin columns, tatami fills and manual stitches. Some embroidery software suites offer the possibility to fill in polygons with so-called programmable or speciality stitches, e.g. radial fills, hatches, little objects etc.

Ink/Stitch does not plan to includes these in the near future. However, some InkScape extension allow to do non standard fills. However, as we first shall explain, the standard default pattern fill does not work, since it cannot be translated to paths (unless there is a way we could not identify).

Using InkScape Patterns - does not work

According to avmjong Bah's Inkscape manual, Any object or set of objects can be turned into a Pattern and used in the fill of an object. The Pattern can be shifted, rotated, and stretched as necessary. Inkscape includes a set of Patterns accessible through the Fill and Stroke dialog. One either can use built-in patterns or use your own ones.

Unfortunately, there is no way to translate a fill with pattern to paths since the pattern is considered a color. And, of course, Ink/stitch cannot handle colors as paths. The only workaround we can envision (but we will have to test this) is to export to illustrator or creating a bitmap that we can then could trace.

Traceback (most recent call last):
  File "inkstitch.py", line 20, in <module>
    if script_name.endswith('.py'):
  File "inkscape-0.92.2/share/extensions/inkex.py", line 283, in affect
  File "lib/extensions/embroider.py", line 84, in effect
  File "lib/stitch_plan/stitch_plan.py", line 28, in patches_to_stitch_plan
  File "lib/stitch_plan/stitch_plan.py", line 168, in color
  File "lib/threads/color.py", line 17, in __init__
ValueError: Invalid color: 'url(#pattern5514)'

Other extensions, e.g. Generate from path -> Voronoi pattern are also using patterns as colors and cannot be used either.

Inkscape fill patters cannot be translated to paths and therefore cannot be stitched with Ink/Stitch

GCode tools

Gcode tools allow to create drawings that are popular with many CNC machines, and 3D printers in particular. The result is not particularly interesting, we believe for now.

Step by step:

• Select a shape
• Remove the fill (unless you plan to stitch two layers
• Gcodetools -> Area or Fill Area or Area Artifacts
• Parametrize
• Break à part the result
• Verify each path and kill the tiny ones.