Flash CS3 frame-by-frame animation tutorial

<pageby nominor="false" comments="false"/>

Definition

Frame-by-frame animation means that to display one image after each other.

Learning goals

Learn about basic frame by frame animation

Prerequisites

Flash CS3 desktop tutorial

Flash layers tutorial (first part)

Flash drawing tutorial (at least some of it)

Moving on

The Flash article has a list of other tutorials.

Quality and level

This text should technical people get going. It's probably not good enough for beginners, but may be used as handout in "hands-on" class. That is what Daniel K. Schneider made it for...

It aims at beginners. More advanced features and tricks are not explained here.

Materials (*.fla file you can play with)

http://tecfa.unige.ch/guides/flash/ex/frame-by-frame-intro/

The executive summary

Purpose: Frame-by-frame animation gives you very detailed control over the movie (since it's the technology animation pictures were made until recently when 2D and 3D computer animation techniques came into the existence). Disadvantage is the this is very time consuming work. Therefore, most often, designer use a combination between frame-by-frame animation and interpolation techniques (called tweening in Flash lingo).

Basic steps:

• Insert drawings in various keyframes

The Time line and keyframes

The principle of all sorts of animations made with drawings (you also can script) is that you draw various versions of the same object in different frames.

A frame is a drawing that is displayed at a given time. In the timeline, each little box is a frame and they are numbered from 1 to ..

When you start drawing with Flash, everything is drawn by default into a first frame in layer 1.

The default keyframe is frame # 1

E.g. if you insert a letter, for example, you will see something like this:

• The first frame in the timeline will have a dot inside
• The playhead showing the current frame (the red rectangle) sits on top of frame one.

Btw. if you feel display of timeline elements is too small, you can fix this with the time line options (little pull-down menu in the upper right). This menu also allows to display a preview of the animation (but takes up space of course).

Time line options pulldown menu

Simple letter after letter animation

The *.fla, *.swf and *.html files flash-cs3-frame-by-frame-hello.* can be found at [http://tecfa.unige.ch/guides/flash/ex/frame-by-frame-intro/

Now let's do a most simple frame-by-frame animation.

We will produce an animation that will display the word "HELLO", one letter after each other. The principle is quite simple: We will insert new letters in new keyframes. One could do this by inserting "H" into keyframe 1, then add "E" to keyframe 2 etc. We will do something slightly different here, i.e. we insert a keyframe every 5 frames.

Step 1

We start drawing the first letter "H" in frame 1 (alternatively you may start in frame 5, i.e. the user won't see the "H" when the frame loads. Anyhow, later on you always can add extra empty frames.

Steps 2 to 5

Now we repeat this procedure by adding new letters in new frames. So first we will transform frame 5 into a new keyframe. The important thing is to understand that there are two kinds of new keyframes:

1. Blank ones that will clear the stage, i.e. in the animation the objects will be gone
2. Keyframes that carry "forward" contents of the keyframe before. We will use this one.

The procedure is the following (see the picture)

• Right-click in a frame, then select Insert Keyframe (not insert blank keyframe).

Editing keyframe #5

Repeat this, until you incrementally spelled ou "HELLO".

Step 6

Test if it works:

• Firstly you simply can move back an forth the playhead (red rectangle that sits on the top of the timeline)
• Then you can test the movie (menu Control->Test Movie).

Step 7

Now we want to tune a few things:

(1) You may not be happy that the movie starts with letter "H" alread displayed. Right-Click on Frame 1 and Insert Frame (not a keyframe!). Then drag the black dot in the new frame 1 to frame 2. Finally insert a few new frames by click-right on frame 1 again.

(2) Your Movie may be too slow or too fast. Flash animation is not time-based (as in SVG for instance) so you have to fix a frame rate. You can change the frame rate (number of pictures shown/second) in two ways:

• Click on an emtpy spot on the stage and change the rate in the properties panel that you should see below
• Menu Modify->Document (CTRL-J)

For this animation about 15 frames are about right I think.

(3) You may also align the letters. But you have to do this in the same way for each keyframe, else they will jump around, which actually may be an effect you like. To align objects, there is an align pane (Window->Align). Anyhow, next time make sure to place your objects exactly where they should be.

Step 8

Now you can publish this as a web page.

• Make sure to safe the animation in some place you can find.
• Then, click on an empty spot in the stage and click the "Publish Settings" button or menu File->Publish Settings.
• Click the publish button when you are happy with the settings. It will put all the necessary files in the same directory where your *.fla file sits. For the moment, you can just click on the Flash *.swf file and see if it works.

Frame-by-frame shaky animation

Sometimes, e.g. in trailers you or little advertizement boxes you can see sort of shaky or jittery icons. Let's do one.

The *.fla, *.swf and *.html files flash-cs3-shaking-hello.* can be found here: http://tecfa.unige.ch/guides/flash/ex/frame-by-frame-intro/

Step 1 - change stage size

• Define size and background color of your stage (I use 400x200 px this time). To do so, click with the selection tool on an empty spot of the stage and change the properties.

• This time, we will use two layers, so create 2 layers, call one of these "hello".

Step 2 - draw a hello word

• In the "hello" layer, draw the word "Hello" with the pencil for a change
• Select the pencil
  • put it into "Smooth mode" (see the
  • Put Flash into object mode (circle in the options area of the tools panel)
  • Select a wide stroke (15px or more)

Go back to drawing tutorial if you don't how to use object mode and set the smooth control for the pencil.

Step 3 - fix the hello word

• You may have to fix the Word "Hello", since despite smooth mode your drawing may not be so hot.
• Firstly use the Free Transform tool to adjust size, rotation, etc.
• The use the Subselection tool to fix certain letters, probably your "o" will be ugly. To do go work, you need to set magnification to something like 400 (Menu View->Magnification). The you can drag around the distortion points' (squares) and kill some of these and/or move the curve control handles (dots attached to a line). Sorry, no futher explanation about envelope transforms here.
• Finally select everything with the selection tool and center it. You may also make the whole drawing bigger or smaller (just change the "W" property in the properties panel while everything is selected, i.e. see the screen capture below).

So you should have (very) roughly something like this:

Hello with the pencil

Step 4 - Draw an oval

• Draw an oval or something around the "Hello" word if look. Use another layer for this and lock the "Hello" layer while you do this. See the Flash layers tutorial if you don't know how to use layers.
• Again, use the subselection tool to fine tune, if you feel like.

Step 5 - Make a new keyframe

Create a new keyframe in frame 2

• Shift-click (hold down) in frame 2 (both layers need to be selected)
• Then Right-click; Insert Key Frame (as explained above).
• Now you should have a copy of both the "hello" word and the Oval in the new frame.

Step 6 - Make changes

• Now you can make slight changes to to your drawings.
• I changed color a bit for everything
  • Unlock the "hello" layer if you have to
  • "Edit->Select All"
  • Change the color in the properties window
• Then twist a little bit some letters and maybe the Oval
  • You can do this for instance with the subselection tool or the Freetransform tool. (I only used the subselection tool and basically turned a few Curve control handles).

Below is a picture of the slighly altered graphics:

Hello with the pencil - second frame

Step 6 - Add other frames

Just two frames will do, but you can add more of course :)

This example was a bit more professional. We tried to select good stage size and made some efforts to get the drawings right.

Rocket science

Frame-by-frame animation is also quite useful if you want to create animated objects that you then can reuse in another animation.

The *.fla, *.swf and *.html files flash-cs3-rocket.* can be found here: http://tecfa.unige.ch/guides/flash/ex/frame-by-frame-intro/

I imported this rocket from Uncyclomedia Commons:

http://commons.uncyclomedia.org/wiki/Image:Rocket.svg

It's an SVG file that I first opened with Illustrator. I then copy/pasted it to Flash. See the Clipart article (i.e. the section on Importing to Flash

What we would like to do is to animate the flames.

Step 1 - Break the rocket into components

• Break the rocket a part (right-click->Break a part). You now should see various rectangles drawn around its various shapes.
• Flames are made with 2 shapes (the two rectangles in the lower right)

A broken apart imported SVG rocket

Step 2 - Put the flames into another layer

The easiest way is to use distribute these to other layers

• Select the 2 flames (hold down the SHIFT key and click on the orange and yellow parts
• Then Right-click->Distribute to layers
• Rename the two layers you created.

Now you should have something like in the screen dump below. I am positioned in the yellow flame layer and show the other two as outlines.

Rocket with flames in layers

Step 3 - Duplicate the layers in frames 2 and 3

• As explained above, in frame 2: Right-click->Insert Keyframe. Do this for each of the three layers
• Repeat this for frame 3.

Step 4 - Change the flames for each frame

• I simply used the Free Transform tool and dragged the rectangle towards the lower right.
• By doing this you alos might move the rectangle itself, just push it back underneath the rocket... (either with the arrows, or with the selection tool).
• In order to do this right, you should each time put all the other layers (rocket plus one of the flames) in outline mode with the layers tool.

Rocket with flames in layers

Reuse frame-by-frame animations as movies

The flash files we just created can be used as components in new Flash animation.

The *.fla, *.swf and *.html files flash-cs3-rocking-hello.* can be found here: http://tecfa.unige.ch/guides/flash/ex/frame-by-frame-intro/

Step 1 - Import *.swf files into the library of a new Flash file

• Create a new flash file (File->New)
• The import stuff you made: File->Import->Import to library
  • Select the flash-cs3-rocket.swf file
  • Do the same with the flash-cs3-shaking-hello.swf file

You now have a nice rocket and a flashing hello in your library:

Hello and rocket movies in your library

Drag the symbols (movies) to the stage

• Now you rocket is too big :(
• No problem. Use the Free Transform tool to make it smaller and to rotate
  • Hold down the SHIFT key when you resize it from a corner !

Here is the result:

Hello and rocket movies used

Links

Example materials

Example files used (including *.fla source) can be found here:

http://tecfa.unige.ch/guides/flash/ex/frame-by-frame-intro/

• Click on either an *.html or *.swf file to see.
• Get just the *.fla file if you want to make modifications. The standard copyright of this wiki applies.