Flash CS3 object transform tutorial

<pageby nominor="false" comments="false"/>

Overview

Flash has quite powerful object transformation tools. This article is part of some other Flash tutorials.

Learning goals

Learn about basic Flash 9 (CS3) object transformations

Prerequisites

Flash CS3 desktop tutorial

Flash drawing tutorial

Moving on

The Flash article has a list of other tutorials.

Quality

This text should technical people get going and may not be good enough for self-learning beginners. It can be used as handout in a "hands-on" class. That is what Daniel K. Schneider made it for...

Level

It aims at beginners. More advanced features and tricks are not explained here.

The executive summary - transform tools in the tools panel

• Use the Select tool to quickly distort an unselected object by moving the cursor close to it until it changes to curve shape, then drag
• Use the Free Transform tool and its variants to make complex transforms of the envelope of a shape, e.g. learn how to use the envelope transform.
• The Subselection tool allows you drag squares (distortion points) and turn/drag circles (curve control handlers). I view it more as a "repair" and "find tuning" tool.
• With the Erasor you can "carve" out objects (like a woodcutter).

The executive summary - transform tools in other places

• The menu Modify Transform can get you directly into the modes of one of these tools.
• The Transform panel (Window->Transform) lets do you the default free transforms by entering property values for size, rotate and skew.
• Finally, there are also transformation icons on the main toolbar (which not shown by default, use Window->Toolbars->Main).

... a rather confusing amount of tools. Probably I forgot something ;)

The select tool

The select tool (arrow on top) strangely enough has two functions. These are entirely different and may lead to confusion.

• Select objects
• Distort objects

To distort objects the easy way, try the select tool first.

Default behavior of the select tool

If you click on an object or if you select it with a selection box you see this:

• A hooked cross icon
• A white circle in the middle of the selected object (or selected objects)

You then can move it around, but that's not what we are interested in right now. The only important thing you may remember is the white dot and that when you see a cross, it means that you succesfully selected the object. The dot represents the center, e.g the point where an object will snap to a motion guide line.

A simple oval

Let's make a banana

Ok, now let's distort an object. Let's start with an oval drawn in object mode. See the picture above or below.

Make a rounded banana with the selection tool

• First, deselect everything (including the banana), e.g. click on the gray workspace area.
• Select the select tool.
• Then move it close to the stroke (outline).
• When the cursor turns into a curve, then hold down the mouse and drag

Select tool - curve icon

Here is a result, a nice banana:

A simple oval turned into a banana

Make sharper ends

• Copy/paste the banana, if you like the old one. (select, ctrl-c, ctrl-v)
• Again, deselect everything
• Then hold down the ALT key and slowly search around the ends of the banana.
• If you see the angle icon, then drag. The angle icon won't show up everywhere, it's bascially meant to drag around corners.

Select tool - curve icon

Result: two bananas of different shape:

A sharp and a round banana

You then can fine tune things with the subselection tool (see below).

The Free transform tool

Make sure that you understand drawing basics, i.e. have an idea what kinds of tools you got in the tools panel. If you don't go read the Flash drawing tutorial please.

Features of the free transform tool

The free transform tool allows you to several things

• By default: Scale, rotate, skew and distort
• Envelope transforms
• Distorts (but see the selection tool)

So again, its a multipurpose tool. You can define its different variants by selecting different mode in the options part of the tools panel (lower end). Read on ...

The Transform panel

Instead of dragging around handles as explained below, you also may type in transformation values in the Transform panel. That's useful for technical drawings.

Get it with the Window->Transform menu. I usually have this docked next to the color panels (top right) as in the following screen capture. (If you don't know how to dock, please read the Flash CS3 desktop tutorial).

A screenshot of tools related to the Free Transform tool

Lots of transform tools ...

Simple transformations

By default the free transform tool let's you scale, rotate, skew.

To select an object for transforms

• Select the Free Transform tool.
• Click on an object (or the other way round)

The transformation controls

• You object will be in a rectangular box with a distortion control in each corner and one in the middle of each line.

To scale in both directions (x and y)

• Grab a corner and drag as in the screen dump below:

X and Y size transform

• If you want to scale a graphic and keep the proportions, hold down the SHIFT key.

To scale into one direction (x or y)

• Drag one of the points in the middle

To rotate an object

• Move your mouse outside near a corner. You will see a rotation icon.
• You then can turn around the object.

Rotate

You also will see the changes in the transformation panel

Envelope transforms

Let's make a designer chair.

Step 1 - Draw a rectangle

• Do it with the rectangle tool

Step 2 - Go into envelope transform

• Select the object first, i.e. the rectangle
• Click on the Free Transform Tool
• Select the Envelope option (see screen capture below).

Envelope Transform with the Free transform tool

Step 3 - Transform

• Drag any little square. These are called distorsion points.
• Once you start transforming you also get curve control handles (the little circles). You can turn these in order to smoothen out curves. See the screendump just below. Or you can drag them to add new distortion (or combine both movements of course)

Envelope transforming to make a designer chair

The transform menu

The Menu Modify->Transform gives you the choice of several kinds of transformations

• Select the object(s) to be transformed first
• Then select from several options

The transform menu

Basically it let's you all you can do with

• The Free Transform tool and its options
• The Subselection tool

The Subselection tool

This tool allows envelope transformations or rather fixing envelope transforms made with the Transform tool in envelope mode. Handles work like in the Envelope transform tool.

Distortion points

The little squares are distortion points

• You can drag anywhere to change the shape of the object
• You also can drag them along the stroke before you drag them out
• You can delete these. Move the cursor over one of these and when the cursor changes shape, click first, then hit delete. This will simplify a stroke.

Curve control handlers

The little dots are curve control handles with which you can adjust the curves in two ways:

• You can turn them to change the curve: smooth or sharpen.
• But you also can drag them to some place to distort the shape ....
• To get curve control handles click on a distortion point or move it.

Dragging out a shape with a curve control

If you can't see well what your are doing (I can't in 100% mode), zoom in like 200 or 400% ...

The erase tool

The erase tool allows you to carve objects. In the options / controls in the tool panel, you can change the way the erasor works.

Erasing shapes (drawn in merge mode) and graphics objects (drawn in object mode) doesn't lead exactly to the same results. When you carve an object it remains an object. When you carve a (single) shape it will divide into other shapes.

We not explain much here, better try it out ...

• Draw three nice fat ovals with a fat stroke. Two of them overlapping
• Then, select the erasor mode. This works like the paint tool
• Use Ctrl-Z to undo what you have done .... so you can try other options.

Erasor modes

Here are the modes:

• Erase normal: Will erase as you paint
• Erase fill: Will only erase fills (paint)
• Erase lines: Will only erase strokes (lines, contours of objects)
• Erase selected fills: Will only erase fills that you have selected (hold down the SHIFT key to select several)
• Erase inside: Will erase fills inside an object if you start erasing inside the object.

The faucet

• Will kill any shape on which you click. It makes a distinction though between the stroke and the fill of an object.

Erasor shape

• You can select different sizes of circles and rectangles
• Use rectangles to carve off rectangles and circles to carve of round stuff.