Lego-compatible marble run: Difference between revisions
Jump to navigation
Jump to search
m (→Introduction) |
mNo edit summary |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
{{under construction}} | |||
== Introduction == | == Introduction == | ||
Lego-compatible marble run is a an extension to [[doblo factory]] to create small or huge Duplo- and Lego-compatible marble runs. Note: Doblos are neither Legos nor Duplos but are somewhat compatible. You can print just one, several or all components and then play at marble run construction, using your LEGO or DUPLO or other compatible blocks. | Lego-compatible marble run is a an extension to [[doblo factory]] to create small or huge Duplo- and Lego-compatible marble runs. Note: Doblos are neither Legos nor Duplos but are somewhat compatible. You can print just one, several or all components and then play at marble run construction, using your LEGO or DUPLO or other compatible blocks. | ||
<gallery widths=500 mode=packed> | <gallery heights=500 widths=500 mode=packed> | ||
lego-duplo-compatible_marble_run_under_construction1.jpg|Marble run under construction | lego-duplo-compatible_marble_run_under_construction1.jpg|Marble run under construction | ||
lego-duplo-compatible_marble_run_under_construction2.jpg|Marble run under construction | lego-duplo-compatible_marble_run_under_construction2.jpg|Marble run under construction | ||
</gallery> | </gallery> | ||
== Tracks == | |||
== Slopes == | |||
== Curves == | |||
== Dishes and cones == | |||
== Working with flex tracks == | |||
There are two sorts of flex tracks, | |||
# Easily bendable ones that should be printed with PETG or similar. They are somewhat fragile, i.e. can break. | |||
# Deformables with heat. Use a heat gun (but be careful not to melt it down) or a hair dryer at full power. To heat up PETG for bending, blow for a minute or more with a hair dryer. | |||
Latest revision as of 18:45, 3 November 2021
This article or section is currently under construction
In principle, someone is working on it and there should be a better version in a not so distant future.
If you want to modify this page, please discuss it with the person working on it (see the "history")
Introduction
Lego-compatible marble run is a an extension to doblo factory to create small or huge Duplo- and Lego-compatible marble runs. Note: Doblos are neither Legos nor Duplos but are somewhat compatible. You can print just one, several or all components and then play at marble run construction, using your LEGO or DUPLO or other compatible blocks.
Marble run under construction
Marble run under construction
Tracks
Slopes
Curves
Dishes and cones
Working with flex tracks
There are two sorts of flex tracks,
- Easily bendable ones that should be printed with PETG or similar. They are somewhat fragile, i.e. can break.
- Deformables with heat. Use a heat gun (but be careful not to melt it down) or a hair dryer at full power. To heat up PETG for bending, blow for a minute or more with a hair dryer.