Adafruit Wearables

Objectives

• be aware of various Adafruit components
• differentiate between Arduino-only micro-controllers and others

See also

• Adafruit Circuit Playground Express
• Adafruit GEMMA
• Adafruit NeoPixel
• MakeCode

• Quality: draft

• Difficulty: beginner

Introduction

This article describes various components of the Adafruit's Wearables, i.e. e-textile components.

According to Wikipedia (Aug 2019), “Adafruit Industries is an open-source hardware company based in New York City. It was founded by Limor Fried in 2005. The company designs, manufactures and sells a number of electronics products, electronics components, tools and accessories. It also produces a number of learning resources, including live and recorded videos related to electronics, technology, and programming.”

“In addition to our FLORA and GEMMA sewable microcontrollers, Adafruit's wearables category includes conductive textiles, battery packs, sensors and LEDs, and all-in-one packs perfect for beginners and as gifts.” (Wearables, retrieved August 28, 2019)

Adafruit wearables are an alternative to the Lilypad

See also:

• Adafruit Circuit Playground Express
• Adafruit GEMMA
• Adafruit NeoPixel

Components of the Adafruit system

Below we provide a short overview. Our favorite system is the [Adafruit Circuit Playground Express]].

Microcontroller boards

All these boards, are some kind of tiny programmable computer and can connect to various other components, e.g. sensors, switches and LEDs.

AdaFruit Flora. Source: Flickr of AdaFruit

659 FLORA V3

FLORA was until recently, Adafruit's main wearable electronics platform. It's built around the Arduino Atmega32u4 chip and has built-in USB support.

• FLORA - Wearable electronic platform: Arduino-compatible - v3 (as of Aug 2019) is the main board. It it includes a processor, a LED and various connectors. ($ 15)
• 4.4 grams
• 4.5 cm diameter (1.75)
• 7mm thick (0.3")
• USB support (Micro B cable needed)
• Battery connector (several battery types are supported, i.e. 3.5v to 16v))
• 14 connectors / also used for sewing.

Circuit Playground

• A FLORA board that integrates LEDs, made for learning Arduino programming.
• See below for the Express pack version.

AdaFruit Circuit Playground Express'. Source: Flickr of AdaFruit

Circuit Playground Express ($25)

• This board can be programmed in several ways, including with MakeCode, associated JavaScript, Python and Arduino. In that respect this board is not a FLORA.
• Circuit Playground Express.
• See Adafruit Circuit Playground Express

GEMMA M0

• This board is very small and also can be programmed with MakeCode
• See Adafruit GEMMA

Input

• FLORA Accelerometer/Compass Sensor - LSM303 - v1.0
• Flora Wearable Ultimate GPS Module
• Flora Color Sensor with White Illumination LED - TCS34725
• Flora UV Index Sensor - Si1145 Light Sensor
• Flora Wearable Bluefruit LE Module. Bluetooth module, can act as controller. But also send data.

Ouptut

• Flora RGB Smart NeoPixel version 2 - Pack of 4
  • See Adafruit NeoPixel
• GEMMA Talking Toy Guts Sound Pack

Packs

• FLORA GPS Starter Pack ($ 90)
• FLORA Budget Pack ($ 35)
• Getting Started with Adafruit FLORA Book Pack ($95). This includes probably everything that is needed for a simple project

Circuit Playground Express

Playground express are interesting for education since the board can be programmed with MakeCode, JavaScript or CircuitPython. In addition, it can communicate with other boards through the infrared sensor. In addition to the built-in LEDs and sensors, one also can attach external components.

See Adafruit Circuit Playground Express

Sewing / fixing

• Small Alligator Clip Test Lead (set of 12) for testing before connecting the threads
• Stainless Medium Conductive Thread - 3 ply - 18 meter/60 ft
• Magnetic Pin Back

Other

• 3 x AAA Battery Holder with On/Off Switch and 2-Pin JST. If you plan to use standard AAA batteries.
• Lithium Ion Polymer Battery - 3.7v 1200mAh plus a a LiIon/LiPoly constant-voltage/constant-current charger to recharge them

Useful tools

At Adafruit

Making with Adafruit components may require various tools, some of which are not necessarily provided by Adafruit.

• Read Maker Tools and Techniques, part of the Adafruit Maker Course

Local sellers

Compare prices before you buy. E.g. for once amazon.fr and Amazon.de offer very high prices.

Switzerland:

• Playzone. Good choice.
• Digikey (OK choice, good prices). Has threads.
• Distrelec. Good choice. Good for institutional shopping. Delivers with bills. No threads.
• Microspot Limited choice,
• Amazon.fr and Amazon.de (limited choice, some very expensive)

Prices:

• Adafruit part 641 (thread) varies from 7 CHF to 15,45 € (Digi-key vs. Amazon.fr)
• Playtound Express: 25 CHF + TVA at Digitec, 38.28 € at Amazon.fr
• Circuit Playground Express kit: 30.90 CHF + TVA at Digitec, 29.35 at Digi-Key.
• Flora RGB Smart NeoPixel version 2 ($35) - Sheet of 20, 34.25 CHF at Digi-key

Links

• Flora Main product page

• Adafruit Maker Course

Bibliography

See also: e-textile

• Stern, B., & Cooper, T. (2015). Getting started with Adafruit FLORA: making wearables with an Arduino-compatible electronics platform. Maker Media, Inc.
• Rozenfeld, M. (2015). How DIY Electronics Startup Adafruit Industries Became a Multimillion-Dollar Company, IEEE, the institute, http://origin.www.theinstitute.ieee.org/career-and-education/startups/how-diy-electronics-startup-adafruit-industries-became-a-multimillion-dollar-company