InkStitch - embroidery patch: Difference between revisions
mNo edit summary |
mNo edit summary |
||
| Line 1: | Line 1: | ||
{{stub}} | |||
{{syllabus | {{syllabus | ||
|is_part_of_syllabus=InkStitch | |is_part_of_syllabus=InkStitch | ||
| Line 12: | Line 13: | ||
|cat_syllabus=InkStitch | |cat_syllabus=InkStitch | ||
}} | }} | ||
== Introduction == | |||
Creating a patch with only an embroidery machine is feasible, but requires a little bit of precision work. | |||
Creating patches is explained in general terms in the [[Embroidery patch]] article. Here, we just summarize one method | |||
* Cut out some fabric of the size of the badge. You can print out a paper version of the design and use it as model. We use our [[Trotec Speedy 100R]] 50Mw laser cutter with settings: power=22, speed=1.9 and Hz=1000. | |||
* Hoop a self-adhesive tear-away stabilizer, sticky side up. Consider using two layers. | |||
* Stitch a placement stitch (cut line) that has the size of the patch. | |||
* Remove the hoop | |||
* Stick the precut fabric inside/on top of the cut line. (If you don't have a sticky stabilizer, glue the fabric) | |||
* Put the hoop back | |||
* Stitch an optional tackdown stitch followed by a zig-zag border first. | |||
* Then stitch the rest of the embroidery. | |||
[[File:Laser-cutting-textured-fabric-for-embroidery-patches.jpg|600px|none|thumb|Cutting fabric for embroidery patches]] | |||
It is probably best not to stitch a background color. Otherwise you will have to manage a pull/push effect and also make sure that the overlap between border and background looks good. The zigzag stitch should come first in order to make sure that it is correctly placed along the borders. Instead, use specialized fabrics for batches that look good, e.g. Twilly or Step from Gunold. | |||
== Templates == | |||
Below is a 6.1cm template with a rather narrow zigzag border. The zigzag has an underlay that maybe should be replaced by a tackdown line. | |||
[[File:inkstitch-patch-61-5mm.svg|thumb|300px|none|SVG model for creating patches. You will have to put something inside]] | |||
== InkStitch example == | |||
[[File:inkstitch-patch-61-5mm-V2.svg|thumb|300px|none|SVG model for creating patches]] | |||
This design has quite a lot of pull. One probably could make the blue frame a bit smaller. The border may have to be improved and the placement stich made a bit bigger. | |||
Revision as of 18:22, 14 June 2018
Introduction
Creating a patch with only an embroidery machine is feasible, but requires a little bit of precision work.
Creating patches is explained in general terms in the Embroidery patch article. Here, we just summarize one method
- Cut out some fabric of the size of the badge. You can print out a paper version of the design and use it as model. We use our Trotec Speedy 100R 50Mw laser cutter with settings: power=22, speed=1.9 and Hz=1000.
- Hoop a self-adhesive tear-away stabilizer, sticky side up. Consider using two layers.
- Stitch a placement stitch (cut line) that has the size of the patch.
- Remove the hoop
- Stick the precut fabric inside/on top of the cut line. (If you don't have a sticky stabilizer, glue the fabric)
- Put the hoop back
- Stitch an optional tackdown stitch followed by a zig-zag border first.
- Then stitch the rest of the embroidery.
It is probably best not to stitch a background color. Otherwise you will have to manage a pull/push effect and also make sure that the overlap between border and background looks good. The zigzag stitch should come first in order to make sure that it is correctly placed along the borders. Instead, use specialized fabrics for batches that look good, e.g. Twilly or Step from Gunold.
Templates
Below is a 6.1cm template with a rather narrow zigzag border. The zigzag has an underlay that maybe should be replaced by a tackdown line.
InkStitch example
This design has quite a lot of pull. One probably could make the blue frame a bit smaller. The border may have to be improved and the placement stich made a bit bigger.