STL editor: Difference between revisions
Jump to navigation
Jump to search
(Created page with "== Introduction == An STL editor can * repair STL files, e.g. fill holes, repair flipped triangles, bad edges, etc. * Merge STL files * Create STL files from other formats * D...") |
(No difference)
|
Revision as of 16:49, 14 August 2015
Introduction
An STL editor can
- repair STL files, e.g. fill holes, repair flipped triangles, bad edges, etc.
- Merge STL files
- Create STL files from other formats
- Do some simple constructions, e.g. subtractive geometry or adding simple parts.
STL files are used in 3D printing.
Products
- STL specific
- Netfab Studio and Netfabb Pro
- Magics from Materialise
- Other tools that could be useful
- [ Meshlab]