Sketchup tutorial: Difference between revisions

The educational technology and digital learning wiki
Jump to navigation Jump to search
Line 106: Line 106:


== Form manipulation ==
== Form manipulation ==
[[image:gs-modification-bar.jpg|frame|none|Modification tools]]


=== Push/Pull extrusion ===
=== Push/Pull extrusion ===
Line 118: Line 120:


=== Moving ===
=== Moving ===


== Extensions, nodels and related software ==
== Extensions, nodels and related software ==

Revision as of 16:47, 6 April 2011

Draft

This article or section is currently under construction

In principle, someone is working on it and there should be a better version in a not so distant future.
If you want to modify this page, please discuss it with the person working on it (see the "history")

<pageby nominor="false" comments="false"/>

Introduction

Setting up the environment

When you first run SketchUp you will see a reduced "getting started" tool bar. You can turn on other Toolbars using the Toolbars submenu in the View menu.

You then can dock these toolbars either on top, left or buttom. Drag the toolbar and release the mouse when the dotted rectangle changes into a fine solid one.

You will find all the toolbars in under the View -> Toolbars menu.

  1. Remove the "getting started toolbar". Either drag it out to the desktop, then close it or untick it in the menu.
  2. Then, tick the large tool set, the measurements and the View toolbars

Most of the toolbars are already included in the large tool set. You don't need these twice ....

Google Sketchup 8: Add/remove toolbars

We suggest to use the following layout:

  1. Use the large toolbar and dock it to the left
  2. On top, add measurements, camera and various extension toolbars that you use frequently
Google Sketchup 8 layout configuration

Getting help

There are several help levels

  • As soon as you select a tool, you can see some basic instructions in the help toolbar. The instructions will guide you step-by-step. Therefore as soon as you managed one step, watch it again !
  • You then can click on the ? to turn on the advisor
  • Finally, within the advisor, there are extra links that will open up a web page

The coordinate system

In the 3D coordinate system points in space are identified by position along three drawing axes:

  1. plus or minus X; +X is a solid red line, -X a dotted red line (right - left)
  2. plus or minus Y; +Y is a solid green line (in - out)
  3. plus or minus Z; +Z is a solid blue line (up - down)
The Sketchup X-Y-Z coordinate system

The plane where the red and green axes lines lie is called the ground plane.

Origin is where all of axes lines start or originate.

Most 3D tools adopt a X-Y-Z scheme. However, the way the axis are presented by default can be very different. E.g. in an X3D modeler, the Z axis sticks out and the Y axis goes up. Going from one to the other representation is easy. A model made in one tool can be rotated into the other. The reason why these different views are adopted is simple. Sketchup is designed to create objects that can be inserted into Google Earth where one typically looks at objects from above. X3D scenes are by default looked at sideways, e.g. in the front.

As an exercise, have a look at the following picture that represents the X-Y-Z "right hand rule" also called right hand coordinate system as it is used in X3D. "x" is your thumb, "y" the index finger, and "z" the middle finger. By simple rotation of your hand you can make it fit with the sketchup representation.


Drawing tip: Keep the middle of the object or scene (collection of objects) around the origin. This way you'd only have to rotate. Otherwise, you first have to translate the model before you rotate.

Moving the scene and the view

Changing the view, i.e. moving the so-called camera can be done through two tool sets:

  • The View bar (tools palette). Get it through Menu View->Toolbars->Views
Sketchup View Bar.
Moves the camera to some prefixed positions (try it !)
  • The camera bar
Sketchup Camera Bar

The most important tools are the orbit and the pan (hand) tool.

  • The orbit tool allows to rotate your view of the scene. This can also be achieved by holding down the middle mouse button. The latter solution is more practical when you are using a drawing tool and don't want to exit from drawing.
  • The pan or hand tool allows you to drag the scene up/down and left/right. Of course, this will not change any coordinates of the model, it will just adjust your view.

The Camera menu includes additional items besides letting you do the same operations as in the two tool bars we just presented. The most useful one is the Zoom extents command. It will zoom in/out until are you objects are visible.

Simple drawing

In the free Google Sketchup version, there are not primitive 3D objects. Basically one has to draw a 2D object and then extrude it into a 3D object. 3D objects then can be further manipulated. For now, we don't plan to write our own tutorial. Instead we point to the most relevant pages from Google's online documentation.

An alternative to drawing is importing models from the warehouse: Select Window -> Components.

Try to create a simple cylinder

  • Draw a circle in the x-z (red-green) plane
  • Create a cylinder by selecting the push/pull tool then by pulling up the circle.

Read more in Creating Geometry with the Push/Pull Tool (Google)

Any surface that is delimited by straight or curved lines can be pulled in or out.

It is good practice to select either the rotation or the hand tool once you are done with a drawing operation. This way you won't draw anything by accident.

Understanding hints from sketchup

SketchUp includes a so-called inference engine to help you drawing in 2D and 3D space. “The inference engine locates or infers points from other points in your model, such as the center of a circle, the midpoint of a line, a line that is perpendicular to the ground plane, a point on a face, a point on an edge, and so on. SketchUp notifies you of these points by using both color indicators and tool tips, which are on-screen messages indicating the location of the cursor as you draw an entity. For example, SketchUp displays the string 'On Face' when the cursor is touching a face. The following image contains five common inference tool tips” (Designing in SketchUp (retr., April 2011).

According to Google, “Most everything you will create in SketchUp can be created by inference using the Line tool.”

Please, go and read the pages on Inference at Google Sketchup. In particular, you should learn about the various Inference types for starters. You then also should learn how to provoke and lock inference (press the shift key for the latter). Understanding the inference tool tips really is crucial. At least you should remember my point and read it sometimes later.

Drawing tools

There are six basic drawing tools. Gs-drawing-bar.jpg

  1. Rectangle
  2. Line
  3. Circle
  4. Arc
  5. Polygone
  6. Free hand

Reading

Form manipulation

Modification tools

Push/Pull extrusion

Follow me extrusion

Offset

Scaling

Rotation

Moving

Extensions, nodels and related software

Both the free and the pro sketchup versions can be much enhanced with so-called plugins. To install a Plugin, copy its files directly to the sketchup plugins directory, e.g c:\programs\google\google sketchup 8\plugins. After restarting plugins you then will have additional tools. Usually there should be a new tool palette.

Another time saving strategy is to import existing models. A lot can be found in the Google 3D Warehouse as explained in the next section

Use SketchUp Components from the Warehouse

  • Within Google Sketchup you have direct access to components that are part of the warehouse: Select Window -> Components.
  • Click the Select tab to make sure you're viewing the Select panel.
  • Click the "Navigation" button (it looks like an upside-down triangle).
  • Select a Bonus Pack, such as "Architecture, or "Landscape." A list of related component collections is displayed.

In prior version of Google Sketchup, these models were available as zip file for download

Otherwise, you can import just any model:

  • File -> 3D Warehouse -> Get models

Indexes for extensions

In order to find good plugins, there are several web sites, e.g.:

  • Register at Sketchup U cation and go to the list or search. We suggest to look at Must have Ruby plugins. I got:
    • Join push / pull (to extrude several objects, found in "must have Ruby plugins")
    • JS Align - align along 1 of the three axis (found through Search in the education forum)
    • A surface tool plugin (allow to draw on curved surfaces, found in "must have Ruby plugins")

Free and free for education plugins

Artisan

1001bit tools

  • 1001bit tools, free for education.
  • This plugin provides a large series tools for architects. Recommended.

Commercial plugins

CADSpan

  • CADspan Includes a resurferface (to create a watertight model), export to STL. A free version is available for pesonal use and small applications.

Slice modeler

  • SketchUp SliceModeler v1.4 $10 or more. Translates a 3D form into vertical x and y slices that you then can print flat for later assembly)

Google building maker

Links and bibliography

At Google
  • http://sketchup.google.com/ (includes the download)
  • Teachers and students from universities can get a free Pro version fairly easily if you can provide some academic proof. See Education

To learn about Google SKetchUp:

Official reference cards:

Get other versions from Google

Informal:

Useful resources
Various tutorials and teaching materials
To sort out
  • Google SketchUp by Jeffery J. Jensen, University of Nevada Las Vegas (includes links to books)
Books
  • 3DVinci sells several tutorials / books.

Acknowledgements

Various objects shown were found in the Google warehouse:

  • Swimming pool by Conan
  • Palm trees by best-lemming

Icons and other images used: