OpenLDAP installation and configuration

This article or section is currently under construction

In principle, someone is working on it and there should be a better version in a not so distant future.
If you want to modify this page, please discuss it with the person working on it (see the "history")

Draft

Introduction

OpenLDAP is the most popular free LDAP server. Documentation is not obvious for beginners, i.e. it takes some time learn how to install and configure a production server.

OpenLDAP 2.x software implements version 3 of LDAP (RFC 4510)

A lot of this information is much better explained in the excellent LDAP for Rocket Scientists guide. These are just installation notes and many (short) explanations are just rephrasing or even cut/paste from their "attribution-noncommercial 2.2" licensed text.

Configuration notes for solaris 10

There is an OpenLDAP version included in a typical installation. You can find it here:

/opt/sfw
/opt/sfw/sbin  - links to binaries
/opt/sfw/libexec - binaries
/opt/sfw/etc/openldap - configuration files
/opt/sfw/var/openldap-data - default data 
/opt/sfw/var/run - PID of the server

Binaires in /opt/sfw/sbin

slapadd -> ../libexec/slapd
slapcat -> ../libexec/slapd
slapdn -> ../libexec/slapd
slapindex -> ../libexec/slapd
slappasswd -> ../libexec/slapd
slaptest -> ../libexec/slapd
slapcat -> ../libexec/slapd
slapdn -> ../libexec/slapd
slapindex -> ../libexec/slapd
slappasswd -> ../libexec/slapd
slaptest -> ../libexec/slapd

The configuration file

Location:

/opt/sfw/etc/openldap/sladpd.conf

You will have to define

• What schemas to load in
• Where datafiles and pidfile etc. go
• What users are allowed to do

Here is a fictional example (comments taken away from the original):

include		/opt/sfw/etc/openldap/schema/core.schema
include		/opt/sfw/etc/openldap/schema/cosine.schema
include		/opt/sfw/etc/openldap/schema/inetorgperson.schema
include		/opt/sfw/etc/openldap/schema/nis.schema
# Add your own
include		/opt/sfw/etc/openldap/schema/tecfa.schema

pidfile		/opt/sfw/var/run/slapd.pid
argsfile	/opt/sfw/var/run/slapd.args

security ssf=1 update_ssf=112 simple_bind=64

# Access contol (this is too minimalistic)
access to attr=userpassword
            by self write
            by anonymous auth
access to *
            by self write
            by users read

database	bdb
# Suffix and root dn, adjust to your own organization
suffix		"dc=tecfa, dc=unige, dc=ch"
# Note: The root uid does not need to be in the LDAP database
rootdn		"uid=xxxx, dc=tecfa, dc=unige, dc=ch"
rootpw		secret
directory	/opt/sfw/var/openldap-data
index	objectClass	eq

You may want to put the data and schema files in some other place than the default, since you may by mistake kill them after an upgrade of the system. e.g. I used /var/openldap instead of /open/sfw/var/

The Root DSE, suffix, naming context etc

• The LDAP protocol assumes there are one or more servers that jointly provide access to a Directory Information Tree (DIT).

• The Root DSE is the topmost (and "invisible" entry) in the LDAP hierarchy. This DSA-specific entry publishes information about the LDAP server including which LDAP versions it supports, any supported SASL mechanisms, supported controls as well as the DN for its subschemaSubentry. In addition to server information, operational attributes may be exposed that allow for extended administration functionality. Client software will usually access this kind of information. The root DSE (DSA-specific Entry) data can be retrieved from an LDAPv3 server by doing a base-level search with a null BaseDN and with filter ObjectClass=*.

• The Directory Information Tree (DIT), also called naming-context refers to the hierarchy of objects that make up the directory structure. More than one DIT may be supported by an LDAP server. A DIT or Naming Context defines a namespace within which information can be searched.

• The root, suffix or base refers to the topmost entry. In practical terms it's the name of the DIT and is part of every distinguised name.

• The rootdn is the id of the superuser. You have to define it and its password in the configuation file (see below).

• Directy System Agent" (DSA) means (basically) "LDAP server". It's X500 slang.

In practical terms, you have at some point to decide how to organize the structure of the LDAP. In a first version I had all objects under the root dn and the DIT had the simple suffix: "o=tecfa.unige.ch".

In a later version I decided to adopt a more common RFC 227 practise and to use the name of the principal web server as suffic. To do so, you must use "dc" (domain component) syntax:

E.g. a domain names like

tecfa.unige.ch

becomes

dc=tecfa,dc=unige,dc=ch

This has to be defined in the slapd.conf file as explained above

suffix		"dc=tecfa, dc=unige, dc=ch"

And the super power user (name "xxxx" here), identified by "rootdn" becomes something like:

rootdn		"uid=xxxx, dc=tecfa, dc=unige, dc=ch"

But bascially speaking you can do whater you like. Actually there is a second "standard". ISO suggested something like

ou=tecfa,o=unige,c=ch

Importing / exporting an LDIF file

To import an LDIF file:

/opt/sfw/sbin/slapadd -v -l your-ldif-file.ldif

To export an LDIF file:

/opt/sfw/sbin/slapcat > file_name.ldif

Warning: When I exported, then modified the structure (e.g. put people inside a ou), then imported ldifs again I noticed that I had to kill all (well some at least) attributes added by the server ! E.g.

entryUUID: ....
entryCSN: ....

If I didn't kill these, I could find anything anymore. Maybe an import/export option I didn't get ...

To add or modify entries

ldapadd -x -D "cn=rootid,dc=tecfa,dc=unige,dc=ch  -f addgroups.ldif -w secret

Change the rootid, the *.ldif file name and the secret password ... Also read the manual page about this. Adding entries that are really new is easy, but modifying old ones requires special ldif commands.

The difference (in a nutshell) between slapadd and ldapadd is that you use slapadd to create a new database (each time: stopping the server, kill all the database files, starting, importing) until you are happy. Once you like your LDAP, then you should use ldapadd to make changes or use some client software.

Testing with a client

You can test your LDAP through an LDPA client like Apache Directory Studio. To connect to your LDAP server, make sure that the port is open both on your client machine and the server machine. By default LDAP uses port 389.

We suggest to install "Apache Directory Studio". To configure a connection to an LDAP server: Menu->LDAP->New connection

In the Authentication tab enter:

Bind DN or user: <the root dn you defined above>

Else, you may have the command line ldapsearch installed. More difficult, but a better bet for debugging.

Syntax for connecting as LDAP administrator:

ldapsearch -b <starting point> -D <user dn for connecting> -w - filter

Example: The following will display all attributes of the object "uid=joemiller" in a database that has root dn (suffix) of "c=tecfa,c=unige,c=ch" and people objects inside "ou=people". It will display all attributes for joe.

ldapsearch -b "ou=people,dc=tecfa,dc=unige,dc=ch" -D "uid=root,dc=tecfa,dc=unige,dc=ch" -w - "uid=joemiller"

Example: The following will search for "Daniel" in givenname(s) and display what it can to an anonymous bind (user). Notice that the people in the example below are just below the DIT root (good enough for a simple addressbook).

ldapsearch -b "o=tecfa.unige.ch" -v "givenname=Daniel"

• "b <starting point>" refers to the top of the tree you want to search. It must be a distinguished name, e.g. "ou=people,dc=example,dc=com". Starting points can be very different from server to server.
• "-w -" will have it prompt for a password.
• "-h host" allows to specify a host, by default it is localhost
• "-v will make verbose output (diagnostics).

The startup script

To start/stop automatically the server you can write a script like this, put it in /etc/init.d and then make links from /etc/rc3.d, /etc/rc0.d etc.

#!/bin/sh
STARTCMD="/opt/sfw/libexec/slapd"

LISTENPORTS="ldap:/// ldaps:///"

STOPCMD="kill -INT `cat /var/openldap/run/slapd.pid`"

# These are some string we reuse to give feedback.
DESC="OpenLDAP standalone Deamon (slapd)"
ERRORMSG="!!!! ERROR:"

# This is used to see if slapd is running. Contains null if it doesn't
# or a process description if it does.
ISRUNNING=`cat /var/openldap/run/slapd.pid`

# Now we check for the argument given on command line
# and act unpon its value
case "$1" in
'start')
    # We test if the server is not already running
    if [ -z "$ISRUNNING" ] ;
    then
	# We test if the server is effectively started when the command is issued.
	if $STARTCMD -h "$LISTENPORTS"  ;
	then
	    echo "$DESC started" ;
	else
	    echo "$ERRORMSG $DESC could not be started"
	    exit ;
	fi
    else
        echo "$ERRORMSG $DESC is already running" ;
    fi
    ;;
'stop')
    # We test if the server is already running
    if [ ! -z "$ISRUNNING" ] ;
    then
	# We test if the server is effectively stopped when the command is issued.
        if $STOPCMD ;
	then
	    echo "$DESC stopped" ;
	else
	    echo "$ERROR $DESC could not be stopped" ;
	fi
    else
        echo "$ERRORMSG $DESC is not running"
	exit ;
    fi
    ;;
'restart')
    # We test if the server is already running
    if [ ! -z "$ISRUNNING" ] ;
    then
	# We test if the server is effectively stopped when the command is issued.
        if $STOPCMD ;
	then
	    # We test if the server is effectively started when the command is issued.
	    if $STARTCMD -h "$LISTENPORTS" ;
	    then
		echo "$DESC restarted" ;
	    else 
	        echo "$ERRORMSG $DESC stopped but not restarted" 
		exit ;
	    fi
	else 
	    echo "$ERRORMSG $DESC could not be stopped (and hence not restarted)"
	    exit ;
	fi
    else
        echo "$DESC is not running: Starting" ;
	if  $STARTCMD -h "$LISTENPORTS" ;
	then 
	    echo "$DESC started" ;
	else
	    echo "$ERRORMSG $DESC could not be started"
	    exit ;
	fi
    fi        
    ;;
'debug')
    # We test if the server is already running
    if [ ! -z "$ISRUNNING" ] ;
    then
	echo "Server was running: stopping"
	if $STOPCMD ;
	then
	    echo "STOPPED" ;
	else
	    echo "$ERRORMSG $DESC could not be stopped"
	    exit ;
	fi
    fi

    # we look if a second argument is given for debug level
    if [ -z "$2" ]
    then
	LOGLEVEL="4095" ;
    else
	LOGLEVEL="$2" ;
    fi

    echo "attempting to start $DESC"
    echo "in debug mode with loglevel $LOGLEVEL"
    echo
    echo "terminal will remain open if it succeeds"
    echo "exit with CTRL-C"


    # Starting the server in debug mode
    if $STARTCMD -d $LOGLEVEL -h "$LISTENPORTS" ;
    then
	# this is a little tricky because the message outputs only
	# when Ctrl-C is issued.
	echo "$DESC STOPPED..." ;
    else 
	echo
	echo
	echo "!!!!!!!!!!!!!!!!!!!!!!!!!!"
	echo "$ERRORMSG $DESC could not be started in debug mode"
	echo "$ERRORMSG or has exited abnormaly"
	echo "!!!!!!!!!!!!!!!!!!!!!!!!!!"
	echo "Check for error messages in the debug trace"
	echo
	exit ;
    fi
    ;;
*)
 # We show how to use that script if the given argument is not recognized.
 echo "**************************************************************************"
 echo "* Usage : /etc/init.d/openldap.server {start|stop|restart [debug_level]} *"
 echo "**************************************************************************"
 ;;
esac

See also on the Internet, e.g. OpenLDAP Start/stop script from LinAgora.org.

= Installation otes for Ubuntu 4.1

OpenLDAP is distributed through the Synaptic Package Manager.

• The installer will ask the rootdn password.
• It also will automatically launch the LDAP server (use Menu System->Administration->Services to stop it again)

Configuration files are in:

/etc/ldap/

The rest is the same.

Operational attributes

There exist so-called operational attributes like "modifyTimestamp". They are not returned unless you specifically request it. You must also have the appropriate permission to view the attribute.

In OpenLDAP, you can ask for "+" to fetch all the operational attributes for an entry. That would look something like this:

   ldapsearch -LLL -W -D "cn=Manager,dc=example,dc=com" -b
   "cn=Christoph,ou=People,dc=dexample,dc=com" "(objectClass=*)" '+'

Or just ask for the "modifyTimestamp" attribute by name. The "+" is similar in concept to the "*" which returns all the non-operational attributes.

An example ldif

This start of an ldif file shows the following:

• The base naming context is dc=tecfa, dc=unige, dc=ch
• All people go inside a single organizational unit: dn: ou=people, dc=tecfa, dc=unige, dc=ch. Else if you distinguis between students, teachers and so forth, you will have to move entries once persons change status (see also "Flat is Good").
• In other words, each person has a dn like this:

dn: uid=xxxx, ou=people, dc=tecfa, dc=unige, dc=ch

dn: dc=tecfa, dc=unige, dc=ch
dc: tecfa
objectClass: dcObject
objectClass: organization
o: TECFA

dn: ou=people, dc=tecfa, dc=unige, dc=ch
objectClass: top
objectClass: organizationalUnit
ou: people
description: All people in the LDAP
structuralObjectClass: organizationalUnit

dn: uid=dksuid, ou=people, dc=tecfa, dc=unige, dc=ch
objectClass: person
objectClass: organizationalPerson
objectClass: inetOrgPerson
objectClass: tdsTecfaPerson
givenName: Daniel
sn: Schneider
cn: Daniel Schneider
uid: schneide
description: Maitre d'enseignement et de recherche
structuralObjectClass: tdsTecfaPerson
tdsMemberCategory: TECFA bureau
tdsMemberCategory: TECFA member
tdsMemberCategory: TECFA teacher
personalTitle: Dr.
.... some entries deleted ....

Access control (ACL)

(not really complete)

OpenLDAP 2.0 contains two methods for specifying access control. The first is static, i.e. you define the rights in configuration files. wo other advantages of this method is that it should be more efficient in most cases and that the rules, being static, cannot be changed by external means using LDAP so it should be more secure. From an operational point of view, the problem of this method is that needs a server restart at every Access contol (ACL) change. (From the FAQ, Configuration / SLAPD Configuration)

The second method for access control inserts access control information inside the directory itself. Unfortunately, the standard for doing this in a way that is interoperable between servers of different vendors (this did not matter in the static config case) has not been finished and exists only as an Internet Draft (i.e. no RFC has been published and the specification might not even get enough consensus for an RFC to be published ever). (From the FAQ)

Via the old method (static)

access to <what> [ by <who> <access> [ <control> ] ]+

• Read 5.2 Securing the Directory (from the "Rocket scientist" manual).
• Read through the subcategories of More information about Access Control (scroll down the page and don't miss any links or examples ...)

Firstly you need to know about two principles:

• The general rule is: write special access rules first, generic access rules last.
• Never write more than a single rule about something. E.g. you can't have two rules rules that define acces to *.

Let's have a look at a few ACL patterns:

By default, anyone and everyone can read anything but but only the rootdn can make any updates (need to verify this). This implicit rule could be made explicit like this:

access to *
   by * read

First rule you may concerns the user passwords. Users can update but not read their password and anonymous users can authenticate (else no user can log in).

access to attrs=userpassword
          by self      =xw
          by anonymous auth

"self" refers to the user.

The following rule means that the owners have full access to their entry and users can read everything. This is something you probably don't want, i.e. you might want to show some information (e.g. homepages or email addresses to a public at large (anonymous readers)

access to *
    by anonymous none
    by self write
    by users read

The following allows anonymous users to read Common Names (cn)

access to cn
   by anonymous read

Defining groups

One way to differentiate rights amoung the users is to create groups for them.

• Firstly we define an object that represents a branch in the DIT within which we then can define various groups.

• Then we can define groups inside. Here we define a "managers" group. I will have the right to change about everything in the DIT.
  • It has the following dn (distinguished unique name): a name (the "cn=managers") plus the global suffix for the LDAP naming context.
  • It belongs to the class "groupOfNames" which is defined in both the core.schema and the cosine.scheme, e.g. schemas that you have by default in your LDAP. This class requires that you define at least the "cn" and that you have at least one "member" attribute. If find this a bit strange, e.g. at some point a group could be empty ...

dn: ou=groups,dc=tecfa,dc=unige.ch
objectclass:organizationalunit
ou: groups
description: DIT tree for various groups

dn: cn=managers,dc=tecfa,dc=unige,dc=ch
objectclass:groupOfNames
ou: groups
cn: managers
description: People that can change most entries in the LDAP (i.e. some TECFA employees).
member: uid=miller,ou=people,dc=tecfa,dc=unige,dc=ch

Once you got such a group you then can give it rights

access to *
       by self       write
       by group.exact="cn=managers,dc=tecfa,dc=unige,dc=ch"
                     write
       by users      read
       by *          none

Via the new method (inside the LDAP)

olcAccess: to <what> [ by <who> <accesslevel> <control> ]+

is a different way of doing it. You should read these olcAccess statements as ldif notation of an LDAP attribute.

• Read the Access Control Chapter of the manual.

• Type man slapd.access

Links

• OpenLDAP FAQ

• LDAP Glossary

• LDAP for Rocket Scientists

• OpenLDAP Software 2.0 - 2.4 Administrator's Guides
  • tip: Use the 1HTML version to search through the page...

• Configuring slapd (version 2.3 on Feb 2008).

• LDAP Tutorial - Exercise with OpenLDAP v2.0.11 on Linux by P. Gietz and N. Klasen (2001)

• LDAP01, Sam Hart's classnotes