View source for File:Fokoos-castle-PLA-3-5mm.jpg

← File:Fokoos-castle-PLA-3-5mm.jpg

Jump to navigation Jump to search

You do not have permission to edit this page, for the following reason:

The action you have requested is limited to users in the group: Users.

You can view and copy the source of this page.

== Summary ==
Doblofactory castle module (for marble run) printed with a Fokoos Odin-5 F3 and PLA+ from Sunly (3.5mm layers with a 0.4mm nozzle)

Return to File:Fokoos-castle-PLA-3-5mm.jpg.

Retrieved from "https://edutechwiki.unige.ch/en/File:Fokoos-castle-PLA-3-5mm.jpg"