Laser cutter

The educational technology and digital learning wiki
Jump to navigation Jump to search

Draft

Low-cost Laser cutters typically used in Fablabs can cut and engrave. They can use materials materials such as wood, Plexiglas or cardboard and cut out various shapes and sizes from them.

Opensource kits / do it yourself

Reprap.org has an interesting Laser Cutter Notes article plus and associated Background page. Both together include instructions on how to create your own, general information plus links to projects.

Lasersaur

Quote: “The Lasersaur is an open source laser cutter. We designed it to fill the need of makers, artist and scientist who wanted a safe and highly-capable machine. Unlike others it comes fully loaded with knowledge to run, maintain, and modify.” (Lasersaur, 6/2014).

axCut

  • axCut
  • Work in progress as of June 2014

LAOS

  • Laoslaser.org
  • Is not a laser cutter but a board + software. It can be be used to onvert existing machine with a better (open source) driving board or for DYI projects.

Buildlog

List of low power commercial laser cutters

This is a just a quick list made be someone who has no expertise.

When comparing prices consider the following (thanx to Wie ich mich für einen Laser entschieden habe.... by Matthias Melcher)

  • Laser tubes must be replaced once in a while (cheap ones cost 500 Euros, good ones 3000 Euros and more). Cheap ones last a few hundred hours, excellent ones (e.g. Synrad) over 20'000 hours (that's many years). In other words, price differences are partly explained by the quality of the laser. The same is true for other parts (mirros, filters, etc.)
  • Cutting/engraving most materials produce dangerous fumes, therefore you also must buy a system to manage the exhausts, i.e. either pump it outside or into a box with a filter. Some materials contain Chlorine (e.g. PVC) and that produces very corrosive fumes. You should not cut these, even with a good exhaust system since the acid will damage your machine.
  • Most activities need cooling (air or water)
  • The laser beam is invisible (but you can add some red dot)
  • Cutting depth is limited, you can't cut deeper even with several passages because the laser is "conical".
  • Lasers can burn (therefore don't leave it alone, and keep a fire extinguisher ready)
  • A laser machine needs space, e.g. count exhaust system, cooler, etc.
  • For many types of use you need extra materials, a cutting table with holes (honeycombed), a cooler (water pump), etc.
  • Laser quality is fairly different, laser power is a relative measure of engraving/cutting strength.
  • Cost / hour could be 20 Euros

In the hobby range, there are at least two types of lasers:

  • C02 / glass. Good for leather, paper, acrylic (plexi glass) and plywood,
  • yag and fiber (good for metal)

Quality / origin: It seems that there are huge price and quality differences in the area of low cost / low power desk top laser cutters. E.g. laser cutters directly imported from China may cost half of Chinese models assembled in Europe, and the latter cost half of high-end American Models. E.g. seemingly similar machines can cost 4 times as much (or more):

  • Direct imports for China: There are many models, e.g. BaiSheng, RedSail. Some of these can be adapted and certified by local companies.
  • Western made/adapted from cheaper parts: Arketype, MLLog, FullSpectrum. (Often?), these models also provide their own software.
  • Expensive parts, US or European made: Epilog, Trotec

Other lists of laser cutters

Arketype

The entry model costs 2800 Euros

5030 Laser cutter
  • Several variants
  • Laser Power: 40W to 60W
  • Footstand or none
  • 300 x 500 mm cutting area
  • 3300 to 3700 Euros
AD Oracle IQ Exhaust system
  • 2350 Euros

BaiSheng

BS-4030
  • New (2014) entry model
BS-6040 60W

Epilog

  • Epilog
  • Probably the most popular brand in FabLabs, good quality but fairly expensive compared to models made in Asia
  • US made
Epilog Mini
  • 457 x 305 mm work area
  • 30 watts of CO2 laser power
  • 32 kgs

Full Spectrum

  • Was also know as "Hurricane" (?), probably one of the best price/quality printers made in USA.
  • Hobby Lasers
  • Professional models start at about $5000

Hobby models:

Basic
  • $1850
  • 40W CO2
Deluxe
  • 40W CO2
  • $2350
New 2014 model
  • $3500
  • Various options, e.g. a $1300 small air filter/purifier or a $2500 large one (needed for cutting acrylic)

GBOSLaser

Mini
  • Laser power :35W
  • Driving system:stepper motor
  • Engraving speed:0-64000mm/min
  • Cutting speed:0-36000mm/min
  • Working area:458mmx305mm

GloForge

GloForge claims to be the biggest 30-day crowdfunding campaign in history. It sells 3 printers (not yet available in nov 2015):

  • can cut most 1/4″ (6mm) plywood and acrylic on one side; twice as thick by reversing and cutting from both sides with optical alignment
  • Custom Laser — Custom CO2 laser tube operating at 10,600 nm averages 40W for Basic Model and 45W for Pro Model

Glowforge Pro with Air Filter: $4,795 (low preorder price)

  • Quote: Our Pro model is designed for frequent, shared use, like a makerspace. It comes with upgraded optics, tube, and cooling. The passthrough lets you use long materials but requires additional safety precautions. Includes an Air Filter.
  • Glowforge Basic: $2,395 (low preorder price)
  • Quote: Our standard model can create everything shown on the Glowforge home page and is perfect for home, hobby, or occasional shop use. It needs ventilation via the provided 4″ diameter (10.2cm) hose. We recommend putting the hose out a window.

HxLaser / Rabbit

  • Hxlaser.com, Rabbit laser USA
  • This Chinese company sells several models from mini to large. Systems sold in the US seem to have other model names...
HX-3050 (Hxlaser.com)
  • A mini engraver / acryl cutter
  • 300 * 500mm engraving area
  • 40/60W Laser
  • 10mm cutting depth acrylic
  • 80kg

A variant ( HX-3050SC type ) comes with a stand.

QX-30-5030 (Rabbit Laser USA
  • Laser power: 30W
  • 500 x 300 mm engraving area
  • $4,800 plus shipping etc.
QX-40-7040 Laser Engraving/Cutting Laser
  • Laser power: 40W or 60W
  • 700 x 400 mm engraving area
  • $6600 - $7100 + shipping

Kern

This is probably a fairly expensive line

MICRO
  • MICRO
  • As of July 2014, comes in two versions: Micro24 and Micro48 (24 vs. 48 inches length)
  • Zone: 609 x 609mm / 1219 x 609mm
  • 227 to 363 kgs.
  • Laser sources: 30 to 400W (i.e. can cut metals, if > 100W)

MLlaser

  • Mllaser and blog
  • MLLaser is a french company that integrates parts mostly made elsewhere (most parts are probably from China)
  • Price tags seem to be low compared to others assembled in Europe
ML-W40M
  • Highest end of their low cost/perfomance model
  • ML-W40M
  • Zone: 200 x 300 mm
  • Price 3300 Euros
  • Formats: AI,BMP, PLT,DXF, JPEG, GIF; DWG

Redsail

China made Redsail lasers are fairly cheap compared to other brands

Redsail (Redsail Laser Cutters Australian site)

M500 Mini Laser Engraver
  • 500 * 300mm
  • Co2 Laser power: 50W
  • $1800
  • 85 kg
X700 Laser Engraver
  • $4000 (direct import from China, including shipping)
  • Engraver and acrylic/leather cutter
M900 Laser Cutting 80W
  • $3000
  • 900mm x 600mm
  • CO2 laser 80W
  • Resolution: 2500 DPI
  • Location precision: 0.01mm
  • PC Interface: USB2.0 and USB Disk
  • Software: Lasermate 5.02
  • Image form: HPGL, BMP, GIF, JPG, JPEG, DXF, DST, AI
  • 180 kg (!)

Trotec/Rayjet

Rayjet 50
  • http://www.rayjetlaser.com/
  • Can cut leather/paper/acrylic, and engrave metals, glass, stone, etc.
  • Dimensions: 726 x 412 x 680 mm / ca. 45 kg
  • Engraving Area: 457 x 305 mm, max high = 145 mm
  • Laser Power: 12 to 50 watts
  • Engraving Speed: 60”/sec
  • 45 kg

An additional Atmos exhaust system that doubles as machine base is available.

The Speedy models come in various configurations (in particular laser type and laser power)

Trotec Speedy 100 / fiber / flex
  • Compact Laser in three variants: Co2, fiber or combined (flex)
  • 610 mm x 305 mm
  • Laser power(s): 40-60W CO2 laser, 10-30W fiber laser
  • The CO2 laser is suited for engraving and cutting plastics, wood, rubber, leather and many other materials. The fiber laser is for marking metals and plastics.
Trotec Speedy 300 / fiber / flex
  • Mid-sized, in three variants (as above)
  • Laser power(s): 25-80W CO2 laser, 10-50W fiber laser
  • This machine has a good reputation for serious and continous work.
  • Pricing: between $20K and $30K in the US, probably add 50% in Europe
Other models

Worldlasers

LaserReady LR 1208
  • LR1208
  • 30 Watt CO2 laser.
  • Zone 12 x 8
LaserReady LR 1612
  • 40W CO2 Laser.
  • 16 x12 zone.

Jamieson Laser

  • Jamieson Laser
  • A US based company importing Chinese made laser machines
  • Affordable compared to other US sellers
Jamieson LP-640
  • Cheapest model starting at $3,790
  • 609 x 406 mm work area
  • 45 watts of CO2 laser power
  • 80 kgs

Links

Using makes and models
Tools
Tutorials
Various articles
Communities
Other
  • CNCKing.com (sells some e-books plus CNC project files/plans)