Stitch Era - free standing lace
Introduction
According to Rick Macali] (retrieved 8/2017), “Freestanding lace (FSL) designs are embrodery designs that are stitched on a special stabilizer that dissolves in water .. what you are left with is the FSL design or designs. Digitizing for lace is much different than digitizing for standard embroidery designs. Only designs digitized for freestanding lace designs will be stable after the stabilizer is washed away .. other designs will typically fall apart.FSL designs have much higher density segments, or a much higher stitch count versus non-lace embroidery designs. A digitizers goal with non-lace embroidery designs is to create a beautiful piece of embroidery with as few stitches as possible, when digitizing for lace, the stitch count is incredibly higher. If you see spaces between your stitches, that is a tell-tale sign that your lace won't hold up when the stabilizer is removed. The satin, or zigzag stitches need to be tight with a high stitch count. Some embroiderers rely upon the weave of the fabric to support the segments, but, I like to digitize a run stitch under the satin segment and that will support the lace.”
Digitizing FSL
There exist several techniques for creating Free standing embroidery.
Three layers with different stitch orientations
To play:
- Import or create a simple vector graphic, e.g. a heart
- Duplicate it three times (cut and past in place). Change their color (just for drawing purposes). Now you got three hearts on top of each other
- Create a cross stitch for the the first
- Create a cross stitch for the second, but change the stich direction by turning the direction handler
- Create a pattern for the third
- Take the third and create a satin stitch for the border.
Alternatively
- You only need one instance and you could digitize the same one three times.But this may lead to confusion maybe.
- You could replace the cross stitch by an Elastic Programmable Stitch (e.g. PS1-0053).
Stitching FSL
- Use a water soluble stabilizer, usually two layers or more. The thicker the lace the more stabilizer.
- Speed: around 500-600 (since the stabilizer is not a strong tissue)
- Use the same color for the bobbin. In principle one should use cotton. (I will first try the same thread as above).
Links
Digitizing free standing lace
- Masterworks III - Making Custom Freestanding YouTube video by Brad Maring (2013).
Tutorials on how to "print" an FSL design (retrieved in Aug. 2017). These tutorials explain some physical principles, give tips on stabilizers, hooping, threads, etc.
- Embroidery Basics: How to Make Free-Standing Lace, October 8, 2014, Kay Hickman
- Anita's Lace Tutorial Part 1, By Steve Wilson on June 03, 2009