File:Cat-t-glase.jpg: Difference between revisions

Revision as of 23:52, 24 February 2016

First print with T-glase plastic. Could be (was) improved later.

Source of the model: thingiverse ??

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	22:19, 11 February 2016		1,305 × 1,327 (865 KB)	Daniel K. Schneider (talk \| contribs)	First print with T-glase plastic. Could be (was) improved later.

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	samsung
Camera model	SM-G920F
Exposure time	1/14 sec (0.071428571428571)
F Number	f/1.9
ISO speed rating	200
Date and time of data generation	16:31, 11 February 2016
Lens focal length	4.3 mm
Latitude	46° 11′ 43″ N
Longitude	6° 8′ 27″ E
Altitude	0 meters above sea level
Width	5,312 px
Height	2,988 px
Orientation	Normal
Horizontal resolution	72 dpi
Vertical resolution	72 dpi
Software used	G920FXXU3QOKN
File change date and time	20:52, 11 February 2016
Y and C positioning	Centered
Exposure Program	Normal program
Exif version	2.2
Date and time of digitizing	16:31, 11 February 2016
APEX shutter speed	3.84
APEX aperture	1.85
APEX brightness	−0.48
APEX exposure bias	0
Maximum land aperture	1.85 APEX (f/1.9)
Metering mode	Center weighted average
Flash	Flash did not fire
User comments	IICSAII
Supported Flashpix version	1
Color space	sRGB
Exposure mode	Auto exposure
White balance	Auto white balance
Focal length in 35 mm film	28 mm
Scene capture type	Standard
Unique image ID	67ED78471C09418B8BCB795EBE900E8B
GPS time (atomic clock)	15:30
GPS date	11 February 2016
GPS tag version	2.2.0.0

Revision as of 22:19, 11 February 2016 (view source) Daniel K. Schneider (talk \| contribs) (First print with T-glase plastic. Could be (was) improved later.)		Revision as of 23:52, 24 February 2016 (view source) Daniel K. Schneider (talk \| contribs) mNo edit summary Newer edit →
Line 1:		Line 1:
	First print with T-glase plastic. Could be (was) improved later.		First print with T-glase plastic. Could be (was) improved later.

			Source of the model: thingiverse ??