Adafruit Wearables: Difference between revisions
Jump to navigation
Jump to search
m (→Boards) |
|||
| Line 12: | Line 12: | ||
=== Boards === | === Boards === | ||
[[image:adafruit-flora-1.jpg|thumb| | [[image:adafruit-flora-1.jpg|thumb|300px|right|AdaFruit Flora. Source: [https://www.flickr.com/photos/adafruit/6732237213 Flickr of AdaFruit]]] | ||
'''659 FLORA''' V3 | '''659 FLORA''' V3 | ||
| Line 28: | Line 28: | ||
* See below for the Express pack version. | * See below for the Express pack version. | ||
[[image:adafruit-flora-circuit-playground-express.jpg|thumb| | [[image:adafruit-flora-circuit-playground-express.jpg|thumb|300px|right|AdaFruit Circuit Playground Express'. Source: [https://www.flickr.com/photos/adafruit/6732237213 Flickr of AdaFruit]]] | ||
'''Circuit Playground Express''' ($25) | '''Circuit Playground Express''' ($25) | ||
| Line 37: | Line 37: | ||
See [[Adafruit Circuit Playground Express]] | See [[Adafruit Circuit Playground Express]] | ||
=== Input === | === Input === | ||
Revision as of 11:36, 25 August 2019
Introduction
FLORA is Adafruit's wearable electronics platform. It's built around the Arduino Atmega32u4 chip and has built-in USB support.
It is an alternative to the Lilypad
Components of the FLORA system
See also:
Boards
AdaFruit Flora. Source: Flickr of AdaFruit
659 FLORA V3
- FLORA - Wearable electronic platform: Arduino-compatible - v3 (as of Aug 2019) is the main board. It it includes a processor, a LED and various connectors. ($ 15)
- 4.4 grams
- 4.5 cm diameter (1.75)
- 7mm thick (0.3")
- USB support (Micro B cable needed)
- Battery connector (several battery types are supported, i.e. 3.5v to 16v))
- 14 connectors / also used for sewing.
Circuit Playground
- An board that integrates LEDs, made for learning Arduino programming.
- See below for the Express pack version.
AdaFruit Circuit Playground Express'. Source: Flickr of AdaFruit
Circuit Playground Express ($25)
- This board can be programmed in several ways, including with MakeCode.
- Circuit Playground Express.
- 50.6mm / ~2.0", Weight: 8.9g
- $ 25
See Adafruit Circuit Playground Express
Input
- FLORA Accelerometer/Compass Sensor - LSM303 - v1.0
- Flora Wearable Ultimate GPS Module
- Flora Color Sensor with White Illumination LED - TCS34725
- Flora UV Index Sensor - Si1145 Light Sensor
- Flora Wearable Bluefruit LE Module. Bluetooth module, can act as controller. But also send data.
Ouptut
Packs
- FLORA GPS Starter Pack ($ 90)
- FLORA Budget Pack ($ 35)
- Getting Started with Adafruit FLORA Book Pack ($95). This includes probably everything that is needed for a simple project
Circuit Playground Express
Playground express are interesting for education since the board can be programmed with MakeCode, JavaScript or CircuitPython. In addition, it can communicate with other boards through the infrared sensor. In addition to the built-in LEDs and sensors, one also can attach external components.
See Adafruit Circuit Playground Express
- Circuit Playground Express - Base Kit, $25, includes a battery and USB cable.
- Circuit Playground Express Advanced Pack, $100, includes 2 Playground express, threads, needles, alligator clips, a servo motor, NeoPixels, etc.
Sewing / fixing
- Small Alligator Clip Test Lead (set of 12) for testing before connecting the threads
- Stainless Medium Conductive Thread - 3 ply - 18 meter/60 ft
- Magnetic Pin Back
Other
- 3 x AAA Battery Holder with On/Off Switch and 2-Pin JST. If you plan to use standard AAA batteries.
- Lithium Ion Polymer Battery - 3.7v 1200mAh plus a a LiIon/LiPoly constant-voltage/constant-current charger to recharge them
Links
- Flora Main product page
Bibliography
See also: e-textile
- Stern, B., & Cooper, T. (2015). Getting started with Adafruit FLORA: making wearables with an Arduino-compatible electronics platform. Maker Media, Inc..