File:Fabbster-34.jpg: Difference between revisions

Latest revision as of 15:08, 26 April 2012

Fabbster 3D printer assembly

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	15:08, 26 April 2012		751 × 787 (158 KB)	Daniel K. Schneider (talk \| contribs)	Fabbster 3D printer assembly

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Image title	SAMSUNG
Camera manufacturer	SAMSUNG
Camera model	GT-I9000
Exposure time	32/719 sec (0.044506258692629)
F Number	f/2.638671875
ISO speed rating	80
Date and time of data generation	12:43, 26 April 2012
Lens focal length	3.79 mm
Latitude	0° 0′ 0″ N
Longitude	0° 0′ 0″ E
Altitude	0 meters above sea level
Orientation	Rotated 90° CW
Software used	fw 05.15 prm 07.55
File change date and time	12:43, 26 April 2012
Y and C positioning	Centered
Exposure Program	Normal program
Exif version	2.2
Date and time of digitizing	12:43, 26 April 2012
Meaning of each component	Y Cb Cr does not exist
APEX shutter speed	4.49
APEX aperture	2.81
APEX brightness	2.5
APEX exposure bias	0
Maximum land aperture	2.81 APEX (f/2.65)
Metering mode	Center weighted average
Light source	Unknown
Flash	Flash did not fire, No flash function
DateTimeOriginal subseconds	00
DateTimeDigitized subseconds	00
Supported Flashpix version	1
Color space	sRGB
Sensing method	One-chip color area sensor
File source	Digital still camera
Scene type	A directly photographed image
Custom image processing	Normal process
Exposure mode	Auto exposure
White balance	Auto white balance
Focal length in 35 mm film	0 mm
Scene capture type	Standard
Contrast	Normal
Saturation	Normal
Sharpness	Normal
GPS tag version	2.2.0.0
Short title	SAMSUNG