Sculptris

Draft

<pageby nominor="false" comments="false"/>

Introduction

Sculpris is a very easy, yet powerful artistic modeling application. Basically you start from a geometric form (e.g. a ball or whater and then sculpt/deform with various tool "brushes". E.g. you can crease, grab, draw, flatten, smoth, etc.

Sculptris (alpha aka 1.02) was developed by Tomas Pettersson and will be further developed by Pixologic: “Sculptris has captured the hearts of artists with its fun, intuitive and user-friendly interface - indeed a perfectly sweet companion to our big monster ZBrush! Tomas will be moving to California, from Sweden, to join our team. It is our pleasure to welcome Tomas and we look forward to a fruitful collaboration on future Pixologic projects [...] Pixologic would also like to give you a little appetizer ‘goodie’, an Alpha version of Sculptris for Windows - a unique, very ‘cool’ artistic modeling application still in raw baby stage and now incubating at Pixologic HQ. The current version, formerly known as Sculptris 1.02, will be renamed under Pixologic banner as Sculptris Alpha 5.” (A Gift From Pixologic, 07-23-10, retrieved nov. 18 2010.

Sculptris for Rapman/RepRap modeling

Sculptris imports/exports *.obj files. With Meshlab they can easily be translated to *.STL if needed. Skeinforge does import *.obj but I never tried.

I didn't try yet, but this is what I think one should do.

Here is a rough outline of the workflow

• Start with the default globe
• Alternatively, you could start with an object that has a flat bottom (e.g. a cube or a cylinder or something found on the Internet). Make sure to make a high-poly object first.
• Probably reduce the meshes after you are done sculpting, i.e. if you plan to distribute the object it's better to make it reasonably small). Skeinforge probably doesn't care much but will just take time.
• Translate to STL
• Position and repair with Netfabb
• Translate to g-code and print

Before you start

Basis are *.obj files

With scultris you start by working on a simple ball or a plane, but you could import any *.obj file. However, in the latter case, symmetry operations won't always work correctly, i.e. if you already have two arms attached to an object, Sculptris won't know about this.

Sculptris (as of 2010/early 2011) is alpha software. Therefore save frequently !!

Symmetry

By default all operations are symmetrical, i.e. if you pull out something to the "left" it will also pull out to the "right". It also will remember up to certain point which "parts" go together. You can turn "Symmetry" off.

When you import an *.obj file, symmetry is off, therefore turn it on if you work on structures like a human.

Brushes

• You can set the "Brush/Tool" size and strength with the rules on top middle.

Views

• mouse-middle to orbit around the object, i.e. rotate it to look at it from a different angle. (So this won't rotate the coordinates of the object, just your view).

• mouse wheel to zoom in/out and (if necessary)

• Shift-middle-mouse to pan (move it left/right or up/down).

Wireframe and triangles

• Click on wireframe to see the structure (at least when you feel that Sculptris has trouble). Reduce triangles with reduced selected tool or the reduce brush if the program starts being being slow. In fact, rather learn how to anticipate using the detail tool.

Basic modeling procedure

(1) Define the very rough shape of the object

• Use the Grab [G] tool for the very rough work, set the brush size and pull out.

(2) Use the various sculpting tools to define the rough shape

the sculpting tool set

Drawing options

Positive vs. negative effect

• Depending if you select a tool with the left or the right mouse button you either produce a default/positif effect or an inverse/negative effect. E.g. with the draw tool, you either either add volume or carve out volume.

Detail

• With the detail slider you can control how many triangles the the brush will add. If you set it to zero, none will be added.

• Always or sometimes put wireframe [W] on in order to control details

Size

• Sets the size of the brush.

Strength

• Sets the strength of the effect. For rough modeling you probably want this at least at 50%.

List of paint tools

(to do ...)

Links

Download

Version 1.02 aka Alpha 5

• Pixologic announcement (link is at the end)
• direct link
• Download at Sculptris.com (this site will probably go away).

Tutorials and Manuals

• Sculptris Cheat cheat. Nice cheat sheet that includes all the shortcuts (nov. 2010).

Propaganda videos

• How to model a reindeer or an elk in Sculptris 1.0 Tutorial

Training videos

• From Concept to creature a Sculptris tutorial, howto
• Sculpting me in Sculptris pt4, howto
• Head modeling in Sculptris
• tuto sculptris part 1
• tuto sculptris part 2
• ... lots of others

Specialized stuff

• the hideous - character workflow
• retopo in blender 2.5
• Repairing Simple Non-manifold meshes with Blender (this is of general usefulness, Such happen a lot with CAD programs when you position two objects just next to each other instead of overlapping).

Shared models

• Default Model sharing Forum thread on ZBrush Central > Sculptris

Support

• ZBrushCentral forum
• Old forum (closed for writing, but does include more useful stuff for beginners).