Stamp size embroidery: Difference between revisions

The educational technology and digital learning wiki
Jump to navigation Jump to search
Line 77: Line 77:
Since this is the type of project that can be easily made with [[InkStitch]]:
Since this is the type of project that can be easily made with [[InkStitch]]:


Parameters:
Parameters for Version 2:
* The positioning line is made for normal or 60 thread.
* The positioning line is made for normal or 60 thread.
* To simulate a rough edge, we create it with en "E" Stich using a thick thread (Decora 12 is easiest). Distance between peaks is 1.8mm
* To simulate a rough edge, we create it with en "E" Stich using a thick thread (Decora 12 is easiest). Distance between peaks is 1.8mm
* The lettering is done with a 60 Polyester thread from Gunold and a 60 universal needle from Schmetz. Density is 7 lines/mm, i.e. 0.28mm peak-to-peak distance in InkStitch
* The lettering is done with a 60 Polyester thread from Gunold and a 60 universal needle from Schmetz. Density is 6 lines/mm, i.e. 0.25mm peak-to-peak distance in InkStitch
* The heart is done with Kanagawa silk thread #50 (similar to Rayon 40).
* The heart is done with Kanagawa silk thread #50 (similar to Rayon 40).
* The needle is done with ordinary Polyester 40 thread.
* The needle is done with ordinary Polyester 60 thread.


<gallery mode="packed" showfilename="true">
Parameters for Version 3:
* The positioning line is made for normal or 60 thread.
* To simulate a rough edge, we create it with en "E" Stich using a thick thread (Decora 12 is easiest). Distance between peaks is 1.8mm
* The lettering is done with a 60 Polyester thread from Gunold and a 60 universal needle from Schmetz. Density is either 6 (v2) or 7 (V3) lines/mm, i.e. 0.28mm peak-to-peak distance in InkStitch
* The heart is done with Kanagawa silk thread #50 (similar to Rayon 40).
* The needle is done with ordinary Polyester 40 thread, but the color was a bad choice.
 
<gallery mode="packed" showfilename="true" heights="200px">
file: inkstitch-stamp-2.jpg|Result version #2
file: inkstitch-stamp-3.svg|Model version #3 ready for embroidery (click twice to download the SVG)
file: inkstitch-stamp-3.svg|Model version #3 ready for embroidery (click twice to download the SVG)
 
file: inkstitch-stamp-3.jpg|Result version #3
</gallery>
</gallery>



Revision as of 18:28, 19 May 2021

Machine embroidery
Module: Computerized embroidery
to improve
2021/05/19
See also


This article or section is currently under construction

In principle, someone is working on it and there should be a better version in a not so distant future.
If you want to modify this page, please discuss it with the person working on it (see the "history")

Introduction

Stamp sized embroidery to define small scale embroidery that roughly fits into a postage stamp area, i.e between 3 x 2.5cm and a bit larger.

embroidered Postage stamps

First embroidered stamp

Several countries now offer embroidered stamps. The first on was created by the Swiss Post in 2000. It was designed by Peter Hostettler, a textile designer from the Bischoff Textiles company in St Gallen. Austria publisehd a series of flow-based design.

"Stamps" in machine embroidery

The word "stamp" is sometimes used to design patterns used in embossed tatami fills, e.g. here

Stamp Size

Stamps come in various sizes, so there is no standard this size.

Typical postage stamp sizes

Cheap, standard series are usually smaller than more expensive "special" editions. A typical size is 2x3cm. Several countries allow designing custom stamps. These are typically larger, e.g. 42x35cm in Austria.

Germany:

  • 21 x 30 mm, 44 x 26 mm, 27 x 33 mm, 35 x 35 mm, 55 x 33 mm
  • 42 x 28 mm Custom stamp

Austria:

  • 42 x 35 mm (Customizable)

Stamp dimension is also defined by the amount of teeth, typically 10 to 14 / 2cm. According to Postage stamp separation, Wikipedia, “The standard for describing perforation is the number of holes (or the "teeth" or perfs of an individual stamp) in a 2-centimeter span. The finest gauge ever used is 18 on stamps of the Malay States in the early 1950s, and the coarsest is 2, seen on the 1891 stamps of Bhopal. Modern stamp perforations tend to range from 11 to 14.”

A10 proposal for embroidery projects

We decided to adopt A10 format (portrait or landscape) in order to laser cut series of patches. The international A series (Wikipedia) is defined in the ISO 216 standard. According to Wikipedia, ISO paper sizes are all based on a single aspect ratio of the square root of 2, or approximately 1:1.41421, i.e.

This ratio has the unique property that when cut or folded in half widthways, the halves also have the same aspect ratio. Each ISO paper size is one half of the area of the next larger size in the same series. (Wikipedia). In addition to being practical (as noted by philosophers in the 18th century), the ratio is also quite pleasant to look at.

A10 is defined in landscape as 26×37 mm or 1.0 × 1.5 inches, but can be used in portrait mode of course.

A10 portrait
A10 default
A9
A8
A 10 = 26×37 mm

Anatomy of a stamp sized embroidery

Small size requires some adaptation:

  • Since hand-made designs do have an interesting look, machine embroidery could use 12 and 30 threads, mostly working with line-based patterns.
  • Detailed designs could be created with fine W.t. 60 thread and needles (size 60)

Examples

InkStitch Propaganda

Since this is the type of project that can be easily made with InkStitch:

Parameters for Version 2:

  • The positioning line is made for normal or 60 thread.
  • To simulate a rough edge, we create it with en "E" Stich using a thick thread (Decora 12 is easiest). Distance between peaks is 1.8mm
  • The lettering is done with a 60 Polyester thread from Gunold and a 60 universal needle from Schmetz. Density is 6 lines/mm, i.e. 0.25mm peak-to-peak distance in InkStitch
  • The heart is done with Kanagawa silk thread #50 (similar to Rayon 40).
  • The needle is done with ordinary Polyester 60 thread.

Parameters for Version 3:

  • The positioning line is made for normal or 60 thread.
  • To simulate a rough edge, we create it with en "E" Stich using a thick thread (Decora 12 is easiest). Distance between peaks is 1.8mm
  • The lettering is done with a 60 Polyester thread from Gunold and a 60 universal needle from Schmetz. Density is either 6 (v2) or 7 (V3) lines/mm, i.e. 0.28mm peak-to-peak distance in InkStitch
  • The heart is done with Kanagawa silk thread #50 (similar to Rayon 40).
  • The needle is done with ordinary Polyester 40 thread, but the color was a bad choice.

Links

Examples of stamp sized embroidery

  • Stitched Miniatures A nice series of free machines embroideries by Gina Ferrari. Made with a sewing machine I believe. (2013, consulted March 2021). Size is less than 2x2'', i.e. 5 x 5 cm.

Examples of embroidered postage stamps

Examples of embroidered stamps

Stamps not only design postage stamps, and also can be embroidered of course