Lego-compatible icon kit: Difference between revisions

The educational technology and digital learning wiki
Jump to navigation Jump to search
(Created page with "== Introduction == This page describes a kit to create Lego-compatible icon bricks (mini, Lego, Duplo and Quatro size) See also: * Doblo factory")
 
mNo edit summary
Line 6: Line 6:
See also:
See also:
* [[Doblo factory]]
* [[Doblo factory]]
== Preparation of the dxf with InkScape ==
# Set the right size, e.g. 40 x 40 mm of the object: CTRL-A, setting the lock,
# then use the W or H on top (whatever is bigger).
# Set the document size to this size plus a 1mm margin (this way re-usability will be better)
# Group the elements,
# then position the group in the center of the document

Revision as of 16:00, 20 January 2021

Introduction

This page describes a kit to create Lego-compatible icon bricks (mini, Lego, Duplo and Quatro size)


See also:

Preparation of the dxf with InkScape

  1. Set the right size, e.g. 40 x 40 mm of the object: CTRL-A, setting the lock,
  2. then use the W or H on top (whatever is bigger).
  3. Set the document size to this size plus a 1mm margin (this way re-usability will be better)
  4. Group the elements,
  5. then position the group in the center of the document