Flash CS3 component button tutorial: Difference between revisions

The educational technology and digital learning wiki
Jump to navigation Jump to search
mNo edit summary
Line 308: Line 308:


; Start from this complete code
; Start from this complete code
<pre>
<source lang="actionscript">
  /* This will stop Flash from playing all the frames
  /* This will stop Flash from playing all the frames
     User must stay in Frame 1 */
     User must stay in Frame 1 */
Line 353: Line 353:
  navigateToURL(request, '_blank');
  navigateToURL(request, '_blank');
  }
  }
</pre>
</source>


; Results and source code
; Results and source code
Line 403: Line 403:


The following code will move the user to a scene called "Credits" in frame 1 and stop after she presses the "credits_btn".
The following code will move the user to a scene called "Credits" in frame 1 and stop after she presses the "credits_btn".
<pre>
<source lang="actionscript">
credits_btn.addEventListener(MouseEvent.CLICK, goCredit);
credits_btn.addEventListener(MouseEvent.CLICK, goCredit);


Line 409: Line 409:
gotoAndStop(1,"Credits");
gotoAndStop(1,"Credits");
}
}
</pre>
</source>
The following code will move the user to a scene called "Animation" in frame 1 and play
The following code will move the user to a scene called "Animation" in frame 1 and play
<pre>
<source lang="actionscript">
restart_btn.addEventListener(MouseEvent.CLICK, restart);
restart_btn.addEventListener(MouseEvent.CLICK, restart);


Line 417: Line 417:
gotoAndPlay(1,"Animation");
gotoAndPlay(1,"Animation");
}
}
</pre>
</source>


; Example and code
; Example and code
Line 430: Line 430:
E.g. in the [http://tecfa.unige.ch/guides/flash/ex/embedded-movie-clips/kite-movie.html flying kites] example, we use the following code:
E.g. in the [http://tecfa.unige.ch/guides/flash/ex/embedded-movie-clips/kite-movie.html flying kites] example, we use the following code:


<pre>
<source lang="actionscript">
kite.stop();
kite.stop();


Line 443: Line 443:
kite.stop();
kite.stop();
}
}
</pre>
</source>


''kite'' is the instance name of the embedded "Kite movie".
''kite'' is the instance name of the embedded "Kite movie".

Revision as of 12:33, 21 May 2009

<pageby nominor="false" comments="false"/>

This is part of the flash tutorials

Introduction

Learning goals
  • Learn how to use the component button
Flash level
9 / ActionScript 3
Prerequisites

The following tutorials are recommended but not fully necessary

Moving on
Level and target population
  • Beginners
Quality
  • This should get you going, component buttons are fairly easy to use.

In Flash CS3 there exist two fundamentally different kinds of buttons:

(1) Button symbols. See the Flash button tutorial. These button symbols (classes) are made with four predefined frames and can include any kind of drawing (including movie clips). Their visual behavior is highly customizable.

(2) Button components. These are part of the built-in components library that provides various interface components (also called widgets or gadgets) that are easy to use. Technically speaking, these buttons are a kind of embedded movie clip. Graphically speaking, these buttons are some kind of nice looking, semi-transparent rounded rectangles. It is not easy to change their look.

Button components are a bit easier to use than button symbols since their labels can be defined through the parameters panel. Otherwise, you use both in the same way, i.e. you will have to write some ActionScript code.

Before we start, let's quote an explanation from the Adobe user manual: “Components are the building blocks for the rich Internet applications that provide these experiences. A component is a movie clip with parameters that allow you to customize the component either during authoring in Flash or at run time with ActionScript methods, properties, and events. Components are designed to allow developers to reuse and share code, and to encapsulate complex functionality that designers can use and customize without using ActionScript.” (Using ActionScript 3.0 Components, retrieved nov 2008).

A menu-based web site with the AS 3 button component

Design goal of the example

The goal is to make a sort of simple Flash web site. The user at all times will have a menu to the left that will allow him to navigate to different contents.

We will build several versions of this. Have a look at the menu-based slide show example before you start reading. Also, we will introduce some ActionScript in a way that is hopefully appropriate for non-programmers.

Notice: In the Flash button tutorial we also demonstrated how to create similar applications with built-in and home-made buttons symbols.

A menu-based flash site

Step 0 - Make sure that you have the right component library

Flash 9 (CS3) and Flash 8 components are different and not compatible. So make sure that you create a Flash (ActionScript 3.0) file or alternatively change the publish settings before you start using the component library.

All built-in Flash components are available through a specific library. To this library:

  • Window->Components or hit CTRL-F7
  • Then dock it somewhere (best is next to your own library)
Step 1- Planning the layers

In this example we will work with five layers:

  • Actions: will include a little Action Script code
  • Buttons: will include the buttons (displayed on all "pages")
  • Pictures: Contents we want to display
  • Credits: A special page for the "who's done it" (we also could have used the pictures layer for this).
  • Background: A simple background that will remain stable.

You layers should look like this:

Timeline of the menu-based slideshow

Create these layers now ! If you don't remember how, see the Flash layers tutorial. As you can see, the timeline is rather short since this is an a application and not an animation that uses the main timeline.

Step 2 - Add pictures or other contents
  • Decide how many pictures you want (we took four)
  • Select the Pictures layer
  • Frame 1 is reserved for a Title page.
  • Create a few new empty keyframes (hit F7) and fill them with pictures or any other content or drawings you'd like. See the button tutorial if you don't know how to import pictures. BTW pasting a picture to the stage also does the trick.
Step 3 - Get buttons from the library
  • Select the buttons layer
  • Open the component library, select "User Interface" and drag as many buttons to the stage as you have pictures. Add an extra one for the credits page.
Button of the Flash CS3/ActionScript3 component library
Step 4 - Learn some ActionScript 3 principles

Let's recall some ActionScript principles here. ActionScript 3 does not allow to attach scripts to buttons (as in ActionScript 2). In order to script a component we basically have to do three things.

  1. Give a name to the component (i.e. the movie instance on the stage)
  2. Fill in some parameters, e.g. add a label for the button. We will do this in the parameters panel.
  3. Add some ActionScript to the timeline that will:
    • Associate a user interaction event (e.g. user clicks) with some "action" function
    • Program this action function
Step 5 - Give a name to each button and change its label
  • Click on a button (make sure to lock other layers)
  • Select the Parameters panel (menu Window->Properties->Parameters)
  • Give the button instance a unique name: e.g. btn_rainbow is fine. ("btn" means "button" and "rainbow" because this button will lead to a rainbow picture). To be safe:
    • Start the label name with a letter
    • For the rest of the name you can use letters, digits or the underscore "_".
    • Do not use whitespaces or punctuation characters or dashes. If you do it wrongly, Flash will complain.
    • I suggest that you use only lower case letters (Names are case sensitive)
  • Then, you should change the label parameter of the button. This is what the user will see. Type anything there, but don't make it too long (it's a button after all).
  • If your text is bigger than the label, change the button width in the same panel, i.e. modify the W: field.

Probably you noticed now that it is to work with a component vs. using buttons as explained in the Flash button tutorial

Parameters of the ActionScript3 button

Make sure you did this to all buttons.

Step 6 - Open the ActionScript panel
  • Click in Frame 1 of the Action Layer you already should have defined (see step 1)
  • Hit F9 to open the "Actions-Frame" panel. In case it is docked with the parameters, you may undock it to have some more space.
  • Then paste all the code from the summary just below (i.e. step 7, 8, 9 code). Alternatively, open the flash-cs3-simple-slide-show-menu.fla file and copy the code from there.

Note: Code that is delimited by /* */ represents so-called comments, i.e. code that is not interpreted by Flash, but that we inserted just to remember what our code is supposed to do. It's always a good idea to document your code ...

Step 7 - Stop the animation from playing in frame one

The stop() instruction will stop Flash from playing all the frames, i.e. we want the user to stay in Frame 1 after the file loads.

 stop();
Step 8 - Associate buttons with an event handler function

ActionScript programming will include two things:

  1. You must define which ActionScript function is executed when a user clicks on a button. Think of a function as a named set of instructions that Flash will execute.
  2. You must define the ActionScript code for these functions. Actually, in this example, we will use the same function for all our buttons (a simpler but longer code example is below).

Associate a handler function for each button instance:

Syntax: button_name.addEventListener(Event.type, function_name

Lines below mean:

  • If the user clicks on the btn_rainbow with the mouse, then the function clickHandler defined below will execute and so forth ...
 btn_rainbow.addEventListener(MouseEvent.CLICK, clickHandler);
 btn_tecfa.addEventListener(MouseEvent.CLICK, clickHandler);
 btn_bosses.addEventListener(MouseEvent.CLICK, clickHandler);
 btn_my_computers.addEventListener(MouseEvent.CLICK, clickHandler);
 btn_credits.addEventListener(MouseEvent.CLICK, clickHandler);

When a user clicks a button, a so-called MouseEvent is happening. This event is then given to the function that we called clickHandler for further treatment.

Step 9 - Write a clickHandler function

Note: you could have chosen an other name, but - as a general rule - function names should be meaningful to you and to other people who read your program.

Let's now look at the complete function code:

 1  function clickHandler(event:MouseEvent):void {
 2  	switch (event.currentTarget.label)
 3  	{
 4  		case "Rainbow" :
 5  			gotoAndStop(2);
 6  			break;
 7  		case "TECFA" :
 8  			gotoAndStop(3);
 9  			break;
10  		case "Bosses" :
11  			gotoAndStop(4);
12  			break;
13  		case "My computers" :
14  			gotoAndStop(5);
15  			break;
16  		case "Credits" :
17  			gotoAndStop(6);
18  			break;
19  	}
20  }

When a user clicks a button, a so-called MouseEvent is happening. This event is then given to the function for further treatment. Formally speaking, when we defined the clickHandler function, defined a parameter for the information it must deal with. In our case, the function must deal with.

 (event:MouseEvent)

means that we define a parameter called "event" (i.e. we name the information that is handed over) and we tell Flash that this parameter is of type "MouseEvent".

We then can use use this "event" information. In order to understand which button was clicked, we can retrieve this from the event information. The following expression:

 event.currentTarget.label

will tell us the label of the button that was the current target.

We use this expression in a so-called switch (or case) statement. It starts on line 2 and ends on line 19. Its syntax is the following:

switch (value) {
  case value_1 :
    /* do something */
    break;
  case value_2 :
    /* do something */
    break;
  }

Now, for each label we then define what Flash should do. We only need one single instruction: Go to frame x and stop again. The instruction is

 gotoAndStop(x)

E.g.

 gotoAndStop(2)

means "move the animation to frame 2" and stop there.

(Summary) - The complete AS3 code

Here is the complete code you could copy/paste/adapt:

stop();

btn_rainbow.addEventListener(MouseEvent.CLICK, clickHandler);
btn_tecfa.addEventListener(MouseEvent.CLICK, clickHandler);
btn_bosses.addEventListener(MouseEvent.CLICK, clickHandler);
btn_my_computers.addEventListener(MouseEvent.CLICK, clickHandler);
btn_credits.addEventListener(MouseEvent.CLICK, clickHandler);

function clickHandler(event:MouseEvent):void {
	switch (event.currentTarget.label)
	{
		case "Rainbow" :
			gotoAndStop(2);
			break;
		case "TECFA" :
			gotoAndStop(3);
			break;
		case "Bosses" :
			gotoAndStop(4);
			break;
		case "My computers" :
			gotoAndStop(5);
			break;
		case "Credits" :
			gotoAndStop(6);
			break;
	}
}

Things you have to change:

  • The instance names of buttons, e.g. btn_rainbow
  • The labels of the buttons, e.g. "Rainbow"
  • The frame to jump to and play, e.g. gotoAndStop(2).

Of course you also could navigate to named frames, e.g. gotoAndStop("Paradise");

If things go wrong

  • Make sure that your syntax is correct. E.g. one single ":" missing may break your program. In the ActionScript window click on the "Check syntax" icon to test for correct syntax.
  • Also indent your code properly. Simply click on the "Auto Format" icon.
  • Make sure that the Action layer extends to the end of your timeline. Put code in frame 1 and then hit F5 in the right-most frame you use (insert frame and not insert keyframe !)
  • Make really sure that your code is in frame 1 and in the Action layer.
  • Make sure that button instance names and label names are exactly the same in the Parameters panel and in your Script.

Here is the picture of the timeline again:

Timeline of the menu-based slideshow

Notice the little "a" in frame 1 of the Actions layer. It means "ActionScript code inside" :)

Adding external URLs to buttons

This shows how to program a button that will open an URL in a Web Browser (look at the example file you can download). Code is a bit complicated since it also will test if the URL really exists.

btn_edutech_wiki.addEventListener(MouseEvent.CLICK, GoToUrl);

function GoToUrl(event:MouseEvent):void {
	var url:String =  "http://edutechwiki.unige.ch/en/Flash_components_tutorial";
	var request:URLRequest = new URLRequest(url);
	try
	{
		navigateToURL(request, '_blank');
	}
	catch (e:Error)
	{
		trace("Error occurred!");
	}
}

A simpler way of doing it without testing:

function GoToUrl(event:MouseEvent):void {
	var request:URLRequest = new URLRequest("http://edutechwiki.unige.ch/en/Flash_components_tutorial");
	navigateToURL(request, '_blank');
Results and source code
http://tecfa.unige.ch/guides/flash/ex/components-intro/

A simpler but longer solution

Too complicated ? You may use a simpler but less elegant code if you have no programming knowledge and feel not comfortable with the "switch" statement. The result will be same, though I changed the color of the background: menu-based slide show with simple AS code

So here is what you need to change:

(1) Event listener registration

So the principle is: For each button you got to register an event listener function. Change:

  • The number of addEventListener definitions (here we got five)
  • Make sure that each btn-xxx corresponds to names you gave to your own button instances
myButton.addEventListener(MouseEvent.CLICK, Handler_A);
(2) Define event listener functions
  • Copy/Paste/Change definitions of functions
  • So change the name of the function, e.g. clickHandler1 into clickHandler2 and the frame it has to jump to.
 function clickHandler2(event:MouseEvent):void {
     gotoAndStop(2);
 }

Note: Formatting in ECMAScript languages does not matter. You could have written the above line as:

 function Handler_A(event:MouseEvent):void {gotoAndStop(2); }

However, make sure to keep delimiters like the { } ;  !!

Start from this complete code
 /* This will stop Flash from playing all the frames
    User must stay in Frame 1 */
 stop();
 
 /* Associate a different handler function for each button instance:
    Syntax: button_name.addEventListener(Event.type, function_name
    Lines below mean:
    * If the user clicks on the btn_rainbow with the mouse,
      then the function clickHandler defined below will execute
 */
 btn_rainbow.addEventListener(MouseEvent.CLICK, clickHandler1);
 btn_tecfa.addEventListener(MouseEvent.CLICK, clickHandler2);
 btn_bosses.addEventListener(MouseEvent.CLICK, clickHandler3);
 btn_my_computers.addEventListener(MouseEvent.CLICK, clickHandler4);
 btn_credits.addEventListener(MouseEvent.CLICK, clickHandler5);
 
 /* Each function defines where to move the playhead in the animation.
    E.g. clickHandler2 will go to frame 3 and then stop
    */
 
 function clickHandler1(event:MouseEvent):void {
 	gotoAndStop(2);
 }
 function clickHandler2(event:MouseEvent):void {
 	gotoAndStop(3);
 }
 function clickHandler3(event:MouseEvent):void {
 	gotoAndStop(4);
 }
 function clickHandler4(event:MouseEvent):void {
 	gotoAndStop(5);
 }
 function clickHandler5(event:MouseEvent):void {
 	gotoAndStop(6);
 }
 
 /* This shows how to open an URL in a WebBrowser */
 
 btn_edutech_wiki.addEventListener(MouseEvent.CLICK, GoToUrl);
 
 function GoToUrl(event:MouseEvent):void {
 	var request:URLRequest = new URLRequest("http://edutechwiki.unige.ch/en/Flash_components_tutorial");
 	navigateToURL(request, '_blank');
 }
Results and source code
http://tecfa.unige.ch/guides/flash/ex/components-intro/

Improvements to be made / exercise

If you got more and/or bigger pictures, you actually should not include the pictures in the *.swf, but rather load these from the Internet. You then have to learn how to use/program a preloader (we will cover this in some other tutorial).

  • You may add text (labels) to each picture
  • You also could add another URL button (e.g. I should add one to the TECFA Logo on top left).
Exercise
  • Add some contents to frame one and add a "home" button to navigate there.

Customizing buttons

You can customize button skins, but this is not easy.

  • Double click the button on the stage

However, before you try this:

  • Be aware that you can change width and height simply though the parameters panel
  • Color will adapt to background (buttons are transparent)

Read more about Customizing the Button at Adobe

Component buttons in an animation example

You may consult this example in order learn:

  • that one can add a button anywhere in the timeline
  • how to work with scenes

Scenes can be understood as fragments of a long timeline (likes scenes in a theatre). They have the following advantage:

  • The timeline becomes shorter and more manageable
  • You can test scenes independently

To add a scene:

  • Menu insert scene
  • To rename a scene: menu Window->Other panels->Scene; then double-click on the scene

To navigate from one scene to another, use code like this:

The following code will move the user to a scene called "Credits" in frame 1 and stop after she presses the "credits_btn".

credits_btn.addEventListener(MouseEvent.CLICK, goCredit);

function goCredit(event:MouseEvent):void {
	gotoAndStop(1,"Credits");
}

The following code will move the user to a scene called "Animation" in frame 1 and play

restart_btn.addEventListener(MouseEvent.CLICK, restart);

function restart(event:MouseEvent):void {
	gotoAndPlay(1,"Animation");
}
Example and code

Component buttons to start/stop embedded movie clips

See the flash embedded movie clip tutorial for details

E.g. in the flying kites example, we use the following code:

kite.stop();

start_button.addEventListener(MouseEvent.CLICK,start_kite);
stop_button.addEventListener(MouseEvent.CLICK,stop_kite);

function start_kite(event:MouseEvent) {
	kite.play();
}

function stop_kite(event:MouseEvent) {
	kite.stop();
}

kite is the instance name of the embedded "Kite movie".

  • kite.play() will play the Kite movie
  • kite.stop() will stop the Kite movie

In other words, if you to the user to be able to start/stop an embedded movie clip, you can do this with a single frame. On other example using several frames that is discussed in the flash embedded movie clip tutorial is an example from an exam.

Links