File:Fokoos-castle-PLA-3-5mm.jpg: Difference between revisions

Latest revision as of 16:36, 14 April 2023

Doblofactory castle module (for marble run) printed with a Fokoos Odin-5 F3 and PLA+ from Sunly (3.5mm layers with a 0.4mm nozzle)

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	16:33, 14 April 2023		2,252 × 3,003 (1.48 MB)	Daniel K. Schneider (talk \| contribs)	Doblofactory castle module (for marble run) printed with a Fokoos Odin-5 F3 and PLA+ from Sunly (3.5mm layers with a 0.5mm nozzle)

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	samsung
Camera model	SM-S908B
Date and time of data generation	00:38, 10 April 2023
Exposure time	1/100 sec (0.01)
F Number	f/1.8
ISO speed rating	200
Lens focal length	6.4 mm
Latitude	44° 37′ 5.4″ N
Longitude	34° 10′ 24.63″ W
Compression scheme	JPEG (old)
Height	3,003 px
Orientation	Normal
File change date and time	00:38, 10 April 2023
Vertical resolution	72 dpi
Horizontal resolution	72 dpi
Width	2,252 px
Software used	S908BXXS2AVI7
Y and C positioning	Centered
APEX aperture	1.69
Exif version	2.2
Scene type	63
APEX exposure bias	0
Exposure Program	Normal program
Color space	sRGB
Unique image ID	DA8XLOD01SM
Maximum land aperture	1.69 APEX (f/1.8)
APEX brightness	1.47
Supported Flashpix version	1
DateTimeOriginal subseconds	0834
White balance	Auto white balance
Custom image processing	Normal process
Exposure mode	Auto exposure
Flash	Flash fired
DateTime subseconds	0834
User comments
Saturation	Normal
Meaning of each component	63 63 63
Focal length in 35 mm film	23 mm
Contrast	Normal
Sharpness	Normal
DateTimeDigitized subseconds	0834
Digital zoom ratio	0
Date and time of digitizing	00:38, 10 April 2023
APEX shutter speed	4.64
Metering mode	Center weighted average
Scene capture type	Standard
Light source	Unknown
GPS time (atomic clock)	22:38
GPS date	9 April 2023
GPS tag version	2.2.0.0

Revision as of 16:33, 14 April 2023 (view source) Daniel K. Schneider (talk \| contribs) (Doblofactory castle module (for marble run) printed with a Fokoos Odin-5 F3 and PLA+ from Sunly (3.5mm layers with a 0.5mm nozzle))		Latest revision as of 16:36, 14 April 2023 (view source) Daniel K. Schneider (talk \| contribs) mNo edit summary
Line 1:		Line 1:
	== Summary ==		== Summary ==
	Doblofactory castle module (for marble run) printed with a Fokoos Odin-5 F3 and PLA+ from Sunly (3.5mm layers with a 0.~~5mm~~ nozzle)		Doblofactory castle module (for marble run) printed with a Fokoos Odin-5 F3 and PLA+ from Sunly (3.5mm layers with a 0.4mm nozzle)