Felix 2.0 3D printer

The educational technology and digital learning wiki
Jump to navigation Jump to search

Introduction

We got the Felix 2.0 on october 25 2013 and we never got around providing more documentation. We bought it assembled and it worked out of the box. As of november 2015 it is still working fine and we are waiting for our new Felix Pro 1.

As of oct. 2013 it is the printer we recommend for educational settings and for three reasons:

  • It prints as well as any other good printer
  • It's light-weight and easily transportable (as opposed to some heavy no better models that seem to popular in the print media)
  • It prints with PLA. ABS fumes may not be too healthy.
  • It's reliable

Although we don't own a Felix 3.x we can recommend it too. See also the Felix 3D printer article. It describes a model we bought in 2012 and it is still working fine. - Daniel K. Schneider (talk) 23:22, 5 November 2015 (CET)

Slicer and control software

As for the 1.0 model, Felix distributes its own packaged distribution of Slicers and user interfaces for 3D printers, i.e. the Repetierhost software and two includes slicers. The slicers include several settings, e.g. "normal" and "quality" as well as a setting for printing spare parts.

As I argued in many other contexts, there is no such thing as universal settings. Some types of model require adjustments of the slicing parameters (not done so far). That being said, the printer does print out of the box...

First adjustments

After the first print, we decided that the platform needed some recalibration. X/Y=0 was higher than X/Y=max which is not good when printing large objects. Therefore we lowered the X/Y=0 corner. After homing the printhead it was really close and should have adjusted the Z-sensor a bit. Since the first layer is mission critical to the kinds of objects we want to print, we left the setting as is (some tiny fraction of mm). That scratched the Kapton tape and we then (only) adjusted the screw that lowers/raises the Z-position homing sensors.

To the right is a little video of the first print.

First print with the Felix 2.0 (as printed out of the box, without calibration)

Pictures of the next two prints (after adjusting the print bed)

As you can see, the slicing is not totally optimal, and we will have to import our old Lego styles and also play with temperature. Both creating Legos and 3D lettering is tricky...