« InkStitch - broderies à partir de dessins faits à la main » : différence entre les versions

De EduTech Wiki
Aller à la navigation Aller à la recherche
Aucun résumé des modifications
Ligne 20 : Ligne 20 :
Créer des fichiers de broderies à partir de photos, de peintures ou de dessins à la main peut s'avérer vraiment difficile et prendre du temps. Nous apprendrons à travers cette page à créer des fichiers stitch à partir de '''dessins simples.'''  
Créer des fichiers de broderies à partir de photos, de peintures ou de dessins à la main peut s'avérer vraiment difficile et prendre du temps. Nous apprendrons à travers cette page à créer des fichiers stitch à partir de '''dessins simples.'''  


Une méthode simple a été testée pour des centaines de dessins pour faire des patches en utilisant le logiciel commercial Stitch Era, comme par exemple au [[Salon du livre]] 2018.  
Une méthode simple a été testée pour des centaines de dessins pour faire des patches en utilisant le logiciel commercial [[Stitch Era - logiciel de broderie machine et de hotfix|Stitch Era,]] comme par exemple au Salon du livre 2018.  


After color reduction (with the free [https://www.gimp.org/downloads/ Gimp] software), vector tracing with (Inkscape) works fairly nicely and easily '''if''' the original drawing is simple.
Après avoir réduit les couleurs (avec le logiciel gratuit [https://www.gimp.org/downloads/ Gimp] ), tracer des vecteurs avec [[Inkscape]] marche assez facilement '''si''' le dessin orignial est simple.  


[[file:vacation-0.jpg|200px|right|thumb|Scanned hand drawing made for embroidery]]
[[file:vacation-0.jpg|200px|right|thumb|Scanned hand drawing made for embroidery]]

Version du 12 décembre 2018 à 12:20

Modèle:Syllabus

Fichier de Broderies à partir de dessins faits main

Créer des fichiers de broderies à partir de photos, de peintures ou de dessins à la main peut s'avérer vraiment difficile et prendre du temps. Nous apprendrons à travers cette page à créer des fichiers stitch à partir de dessins simples.

Une méthode simple a été testée pour des centaines de dessins pour faire des patches en utilisant le logiciel commercial Stitch Era, comme par exemple au Salon du livre 2018.

Après avoir réduit les couleurs (avec le logiciel gratuit Gimp ), tracer des vecteurs avec Inkscape marche assez facilement si le dessin orignial est simple.

Fichier:Vacation-0.jpg
Scanned hand drawing made for embroidery

Desirable hand drawings

In order to create a manageable SVG file from a hand drawing, we strongly suggest that you obey the following rules

  • use large felt pens
  • use few colors
  • use contrasted colors (e.g. red, blue, green, black)
  • do not produce large fills (that is more related to the issue of creating something that is easier to stitch)

To the right is an acceptable example (I am not talking about the quality of the drawing).

It is possible to deal fairly easily with more complex children's drawings, as we explain in Stitching children's drawings, made for the commercial Stitch Era software.

Creating an embroidery file from a painting or a photograph is a time-consuming and almost pointless affair.

Scan, crop and reduce colors

Before vectorizing (also tracing) a scanned drawing, we strongly suggest to reduce its colors. If you do that, scanning will be very accurate.

Many software allow reducing colors. We explain how to use Gimp, a powerful free image manipulation software. It's a complex tool that requires time-to-learn. However, the manipulations we demonstrate below, are not too difficult.

Step 1 - Scan

Scan the picture in *.jpg format

Any resolution will do since embroidery works at fairly low resolution

Step 2 - Crop

Crop the picture. You do not need to pay a lot of attention to the size of the margins. However you must decide whether you want the whole picture or just part of it. Below we decided to crop some of the drawing to make it more rectangular.

  • Open the picture in Gimp
  • Drag the mouse to select a rectangle. By default, the rectangle selection tool is already selected. You can pull/push borders of the rectangle (move the cursor real close), before you click on "Crop to Selection"
  • Save the file
Cropping a picture with Gimp 2.10

Step 3 - Reduce colors

As explained in the Gimp online manual, color reduction is really simple (unless you require smooth transitions between colors, which embroidery does not)

Open the color reduction tool and reduce the colors with the following conversion parameters:

  • Set Maximum number of colors to the number of colors you can count in your drawing, plus one for the background
  • Do not use any dithering options.
  • Click on Convert and check the result (see after the figure)
Figure: Color reduction with Gimp 2.10
Use indexed colors
Select appropriate color numbers

If you can see all your drawings in the approximately right colors, then move on, else:

  • Undo (hit Ctrl-Z)
  • Add an extra color
  • Repeat this, until you see all your drawings in a different color.
Before and after color reduction
Scanned hand drawing made for embroidery, cropped
Scanned hand drawing made for embroidery, color reduced

Step 4 - Adjust colors (optional)

Open the colormap tool:

  • Windows -> Dockable dialogs -> Colormap
Color reduction with Gimp 2.10

You now could change the colors or also merge two colors, e.g. by assigning the same color code to two or more indexed colors. You also should make the background full white (#ffffff), unless you want to stitch it.

Color reduction with Gimp 2.10

Step 5 - Remove background (optional)

You can make the background color transparent (unless some of the drawing uses the same color).

  • In the prior step 4, make sure that the background is white (#ffffff).
  • Add a channel for the alpha layer: Layer -> Transparency -> Add Alpha Channel
  • colors -> Colors to Alpha ...
Make the background transparent

Save the file.

Step 5 - Export

In order to trace the raster file we need a format that Inkscape can read and that keeps the transparent background

  • Export the file to a PNG file

Trace the raster file with InkScape

Now you have to translate the color-reduced raster file to SVG vector graphics. If your drawing is simple, this is not too complicated. If not, it can take hours ...

Tracing with Inkscape

To vectorize a raster image - i.e. translate "dots" to drawings - do the following. However, depending on your drawing you may have to adapt the options a bit.

  • Open the picture in InkScape, i.e. import the reduced color *.png picture you created with GIMP (File -> Open)
  • Select the picture (click on it)
  • Open the tracing tool (Menu path -> Trace Bitmap)
  • Tick colors under Multiple scans ....
  • Set smoothing options (in our case, this did not make any difference, but in some other cases it can)
  • Select the number of paths you want (normally N is the number of colors you got). If you add more scans, e.g. 8 for 4 colors, it will produce traces for the strokes for example. Start with N = you colors + the background, then click on Update. If the preview is OK, then trace.
  • Click OK to trace. The result will be put in an SVG group. This means that you on can trace several times. Each time, a new group is created.

Normally, for embroidery, use aggressive smoothing options (however, this doesn't have an interesting effect in our case.):

Tracing with Inkscape - Extra tracing options

After tracing, the picture is still there, you can consider killing it or leaving it as hidden layer. Now check the result

  • Hide the picture layer
  • Open the path group
  • For each path give it meaningful name, e.g. the color.

Kill extra paths you do not need (e.g. outlines created if you use extra scans). Also make sure to delete alternative versions since you likely will get mixed up.

Tracing with Inkscape

As you can see, despite aggressive smoothing options, the tracing procedure did not really smooth much. To smooth the path, you now can use the normal smoothing tool

  • If you feel lucky: Select All (CTRL-A)
  • CTRL-L or Path->Simplify

Now save the file in SVG format, as *.svg

Prepare for embroidery

If not already done so, adjust the size of your embroidery.

  • Set the measures in the main menu bar from px to mm or whatever you like
  • Lock dimensions in the menu bar
  • CTRL-A (Select All)
  • Type the new size
Adjust drawing sizes

After resizing, adjust the document size (Menu File -> Document properties)

  • Select ALL (CTRL-A)
  • Select Resize page to content
  • Add a small margin
Adjust document size

Create a layer for the embroidery (optional)

  • Create a new layer
  • Move all the objects you want to stitch in there (using the Menu: Layers -> Move Selection to Layer)

Create single polygones:

  • Since InkStitch wants to have connected path, you may have to break apart paths that are not, e.g. the blue one in our case. Also the green did have on little extra speckle somewhere.
Menu Path -> Break Apart (CTRL-SHIFT-K)
Result
Fichier:Vacation-2b.svg
Embroidery with simple fills (SVG for download)
Resulting SVG file structure

Now, most of this design should be embroidered with satin stitches. There are two ways of doing this:

  • Modify the path as described before
  • Add extra scans to the tracing (e.g. 8 instead of 4). By sorting through the produced path, you will find outlines

In both cases, there will be some work. Use direction lines (rungs) to segment paths.

Copyright modification

Contents of this page including pictures and SVG files are also available under the GNU Free Documentation License and the Attribution 4.0 International (CC BY 4.0) license.

The Inkstitch project can use any element (text fragments, SVG files, pictures) for the project's official docs without giving attribution (just copy and paste).