InkStitch - embroidery logos: Difference between revisions

The educational technology and digital learning wiki
Jump to navigation Jump to search
mNo edit summary
(One intermediate revision by the same user not shown)
Line 96: Line 96:
=== Mediawiki Logo with satin stitches ===
=== Mediawiki Logo with satin stitches ===


Creating a sating stitch version takes some more time. You will have to go through the following steps to create nice sating stitched flower petals
Creating a sating stitch version takes some more time. Firstly the file should be reorganized and include different sublayers for each type of embroidery.


* Move the center circle away (temporarilty)
[[file:MediaWiki_logo_reworked_satin_6.svg|300px|thumb|none|SVG Version for download, only partially completed !]]
 
You will have to go through the following steps to create nice sating stitched flower petals
 
* Select all the petals
* Remove the fill, add 1mm strokes and make them yellow
* Move the center circle away (temporarily)
* Show the tool controls bar (Menu View -> Show/Hide)
* Show the tool controls bar (Menu View -> Show/Hide)
* open the Edit nodes tool
* open the Edit nodes tool
Line 111: Line 117:


[[File:Mediawiki-logo-3.png|thumb|600px|none|Flower petal satin stitched with rungs]]
[[File:Mediawiki-logo-3.png|thumb|600px|none|Flower petal satin stitched with rungs]]
To finish this, I probably would need one 1-2 hours.... maybe sometimes later.

Revision as of 18:05, 18 June 2018

InkStitch
Module: InkStitch
◀▬▬▶
draft beginner
2018/06/18 ⚒⚒ 2018/06/05
Objectives
  • Download an SVG icon

    Transform SVG drawings into a series of simple path

    Create simple stitch files with fills
See also

Objectives

  • Download an SVG icon Transform SVG drawings into a series of simple path Create simple stitch files with fills

See also

  • Quality: draft
  • Difficulty: beginner

Introduction

Creating professional logos is probably fairly difficult. However, you can fairly easily create a logo if the original drawing or picture is not too complicated.

We suggest that you support your favorite open source projects by stitching their logo on your cloth and bags. A good start would be Mediawiki, i.e. the software that runs Wikipedia and this wiki.

Get the original logo or take it from here:

SVG Version of the original logo for download

Before it can be stitched, this logo needs some work. In addition, overlaps must be removed.

Transform the SVG into a file with many paths

The SVG file is composed of a few complex path that cannot be stitched as is. Each petal and each letter should become a path. Petals are not really separated by space, but someone painted some white lines on top. We either could stitch these or (as we do here) remove them.

Structure of the initial SVG file
  • Select all and ungroup once

Create a single path for the flower

In the original, the flower is composed of single path that defines the yellow and 25 little white stripes that separate visually the petals. Now let use separate the petals for real. We shall do that by subtracting the white traits from the yellow sunflower outline.

  • Open the objects panel.
  • Select all the white little stripes (inside the group Inline stripes)
  • Make the strokes a bit fatter, e.g. 1.5mm
  • Transform the (still selected) strokes to paths (Menu path:Stroke to path).
  • Merge all these new "stripe" paths into a single path (CTRL-K)
  • SHIFT-Select the yellow flower (Tournesol_1_), followed by the new combined "stripes" path
  • Menu Path -> Difference.
  • Fix the petals with the Node Editor (optional, I did not)

You now should only have a yellow flower left, the stripes should be gone. If not, repeat the above.

Fix the center of the flower, i.e. keep the circle but remove the yellow behind

  • Select the center circle
  • Transform it to a path (Menu Path -> Object ot Path)
  • Copy/paste in place. You now have two objects
  • CTRL-select Flower and the new center drawing
  • Menu Path -> Difference

You now removed the overlap of the circle in the center with the flower petal behind, i.e. you created a big hole in the yellow drawing

Remove some junk left by Illustrator and use cleanup procedures

  • Open the XML editor
  • Kill the metadata section (use the little "remove node" icon on top)
  • Now Select All and Ungroup
  • File -> Cleanup
  • File -> Save as optimized SVG

Break apart the tournesol

The current drawing cannot be stitched yet because both the flower and the lettering are very complicated paths that should be broken up into simpler ones.

  • Select tournesol
  • Path -> Break Apart
  • Select Mediawiki text
  • Path -> Break Apart
  • Fix the "D" letter (SHIFT select outside, then the inside. Then make a difference as above)
  • Fix the "A" letter

Put everything into a layer

  • Create a new layer
  • Select all and move to new layer

Parametrize

  • Select all
  • Menu Extensions -> Embroidery - Params
  • Select Autofill with an underlay

Mediawiki logo with simple fills - result

(simulated)

To stitch the following, Ink/Stitch v. 1.90 (or higher) is required in order to produce a machine embroidery file. Older versions may crash - 18:04, 18 June 2018 (CEST)

Stitchable SVG Version for download
Simulation

Mediawiki Logo with satin stitches

Creating a sating stitch version takes some more time. Firstly the file should be reorganized and include different sublayers for each type of embroidery.

SVG Version for download, only partially completed !

You will have to go through the following steps to create nice sating stitched flower petals

  • Select all the petals
  • Remove the fill, add 1mm strokes and make them yellow
  • Move the center circle away (temporarily)
  • Show the tool controls bar (Menu View -> Show/Hide)
  • open the Edit nodes tool
  • Remove the segment at the bottom of each petal: Select the bottom segment and click Delete segment between two non-endpoint nodes
  • Select a single node on the top a each petal and break the path there: Break path at selected nodes
  • Select one of the two subpath and reverse the direction (Menu: Path-Reverse)

If the number of nodes is even in each subpath, then you will get this

Flower petal satin stitched

If you get an error message like error: satin column: object path924 has two paths with an unequal number of points (5 and 6), either make the points event or at at least rung as explained in the InkStitch - satin columns tutorial.

Flower petal satin stitched with rungs

To finish this, I probably would need one 1-2 hours.... maybe sometimes later.