Coordination activités outreach STIC IV 2019/making@home 3D

De EduTech Wiki
< Coordination activités outreach STIC IV 2019
Révision datée du 19 mai 2020 à 13:17 par Lydie BOUFFLERS (discussion | contributions) (Page créée avec « Training modules addressing a similar topic are grouped (by domain) and organised to provide a coherent training cycle on a set of FacLab capabilities for example 2D, 3D,... »)
(diff) ← Version précédente | Voir la version actuelle (diff) | Version suivante → (diff)
Aller à la navigation Aller à la recherche

Training modules addressing a similar topic are grouped (by domain) and organised to provide a coherent training cycle on a set of FacLab capabilities for example 2D, 3D, electronics. Training modules of a given cycle are usually given one module per week, this to provide enough time to consolidate and practice the learnings in-between training sessions. Different cycles can run in parallel (that is in the same week).

Pour info… Voici le programme de formation du FacLab que j’espère être capable de donner (avec de l’aide pour certains domaines) dès Septembre sur les différentes capacité que le FacLab offre à ces utilisateurs. A noter que j’ai déjà fais plusieurs itérations de session de formation laser, vinyle, design 2D et des ateliers avant le confinement. Le reste des modules de formations est en développement (design 3D, impression 3D, fraisage CNC) et pour l’électronique ce sera probablement avec des passionnés du CUI qu’on va monter qqch.

- -

2D

  • 2D modeling for digital fabrication (with Inkscape)
  • Laser cutting (with the Glowforge+)
  • Vinyl cutting (with the Cricut Maker)

3D

  • 3D modeling for digital fabrication (with Onshape)
  • 3D modeling for digital fabrication (with OpenSCAD/BlockSCAD)
  • 3D printing SLA (with Peopoly Moai 130)
  • CNC milling (with Sienci Labs Mill One)

Electronics • Electronics 1 • Electronics 2

Workshops • Rubber stamp design and laser cutting/engraving • T-shirt design and vinyl cutting (and heat transfer)

The use of the FacLab capabilities is restricted to trained members (that is for both human and machine safety). Therefore a growing number of training opportunities and workshops are offered to the FacLab members. The main objective of these training opportunities is to help FacLab members to become autonomous users of the various capabilities available to them.

The various trainings are developed as modules of approx. 90 minutes, all based on the following structure:

• About the training session • About the FacLab • About digital fabrication • About fablabs • Topic introduction • Topic specifics • Topic exercise • Topic resources • Wrap-up - -